Searching Operators Or Goods - RADWAG TMC 0,3/0,6 KTPS/H1 User Manual

−
Put subsequent packages on the scale,
−
After stabilising press Enter,
−
If the average tare is acceptable (standard deviation criterion) you
will see an appropriate message
−
If the average tare is not acceptable (standard deviation criterion)
you will see an appropriate message

9.6. Searching operators or goods

Before starting control operator must enter his/her own code and a
code describing a product. It can be done by:
−
Inscribing,
−
Finding in the database KTP NET.
For searching databases press:
−
User (for searching operators)
−
Assort. (for searching products)
- 23 -