Grizzly H2935 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Sander
  5. H2935
  6. Owner's manual
Grizzly H2935 Owner's Manual

Grizzly H2935 Owner's Manual

Downdraft sanding table
Hide thumbs Also See for H2935:
Table of Contents

Advertisement

Quick Links

Download this manual
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
The following change was recently made to these machines since the owner's manual was printed:
•
Motor has changed.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
Revised H2935 Motor
13V3
REF PART #
DESCRIPTION
13V3 PH2935013V3 MOTOR 1/3HP 120V 1-PH V3.06.16
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
READ THIS FIRST
COPYRIGHT © JUNE, 2016 BY GRIZZLY INDUSTRIAL, INC.
#JH18255 PRINTED IN TAIWAN
Model H2935 & H2936
***IMPORTANT UPDATE***
For Machines Mfd. Since 06/16
and Owner's Manual Revised 01/12
Revised H2936 Motor
13V3
REF PART #
DESCRIPTION
13V3 PH2936013V3 MOTOR 1/2HP 120V 1-PH V3.06.16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H2935 and is the answer not in the manual?

Questions and answers

Related Manuals for Grizzly H2935

Summary of Contents for Grizzly H2935

  • Page 1 For Machines Mfd. Since 06/16 and Owner's Manual Revised 01/12 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The following change was recently made to these machines since the owner's manual was printed: •...
  • Page 2 (For Models Manufactured Since 2/12) H2935 H2936 Copyright © MAy, 2006 By grizzly industriAl, inC. rEVisEd JAnuAry, 2012 (ts) WARNING: NO pORTION OF THIS MANuAL MAy BE REpRODucED IN ANy SHApE OR FORM WITHOuT THE WRITTEN AppROvAL OF GRIzzLy INDuSTRIAL, INc.
  • Page 3 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 4: Table Of Contents

    SEcTION 4: OpERATIONS ......19 Manual Accuracy ........... 2 disabling switch........... 19 Contact info............ 2 dust drawer ..........19 h2935 Machine data sheet......3 operation ............. 20 h2936 Machine data sheet......5 SEcTION 5: AccESSORIES ......21 identification ........... 7 SEcTION 6: MAINTENANcE ......

  • Page 5: Introduction

    Your Machine For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. Any updates to your model of machine will be reflected in these documents as soon as they are complete.

  • Page 6: H2935 Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL H2935 23" X 31" DOWNDRAFT TABLE Product Dimensions: Weight................................189 lbs. Width (side-to-side) x Depth (front-to-back) x Height............33-3/4 x 23-1/2 x 39-3/8 in.
  • Page 7 The information contained herein is deemed accurate as of 1/31/2012 and represents our most recent product specifications. Model H2935 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model h2935/h2936 (Mfg. since 2/12)

  • Page 8: H2936 Machine Data Sheet

    Length x Width x Height........................30 x 41 x 36 in. Electrical: Power Requirement......................120V, Single-Phase, 60 Hz Full-Load Current Rating............................8.5A Minimum Circuit Size.............................. 15A Switch........................Grizzly Toggle with Lockout Key Switch Voltage..............................120V Cord Length................................12 ft. Plug Included................................Yes Included Plug Type............................ NEMA 5-15...
  • Page 9 The information contained herein is deemed accurate as of 1/31/2012 and represents our most recent product specifications. Model H2936 PAGE 2 OF 2 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model h2935/h2936 (Mfg. since 2/12)

  • Page 10: Identification

    Identification Figure 1. Front view, Model h2935. A. Foot pad B. dust drawer c. steel panel D. downdraft plates E. hanger 120V outlet receptacle G. outlet plate H. on/oFF switch Circuit Breaker To reduce the risk of serious injury when using...

  • Page 11: Section 1: Safety

    MENTAL ALERTNESS. Be mentally alert when hazards associated with each workpiece material, running machinery. Never operate under the and always wear a NIOSH-approved respirator to influence of drugs or alcohol, when tired, or when reduce your risk. distracted. Model h2935/h2936 (Mfg. since 2/12)
  • Page 12 FORCING MACHINERY.­Do­not­force­machine.­ Contact­ our­ Technical­ Support­ Department­ at­ It­ will­ do­ the­ job­ safer­ and­ better­ at­ the­ rate­ for­ (570)­546-9663. which­it­was­designed. Model h2935/h2936 (Mfg. since 2/12)
  • Page 13 Failure to do so could result in serious per- operator injury. If normal safety precautions sonal injury, damage to equipment, or poor are overlooked or ignored, serious personal injury may occur. work results. -10- Model h2935/h2936 (Mfg. since 2/12)

  • Page 14: Section 2: Power Supply

    For your own safety and protection of H2935 Full-Load current Rating ..7.5 Amps property, consult a qualified electrician if H2936 Full-Load current Rating ..8.5 Amps you are unsure about wiring practices or electrical codes in your area.

  • Page 15: Grounding & Plug Requirements

    Two-prong outlets do not meet the grounding requirements for this machine. Do not modify or use an adapter on the plug provided—if it will not fit the outlet, have a qualified electrician install the proper outlet with a verified ground. -12- Model h2935/h2936 (Mfg. since 2/12)

  • Page 16: Section 3: Set Up

    #2 ....... 1 tions before starting the machine! unpacking Wear safety glasses dur- the Model h2935/h2936 was carefully packed ing the entire set up pro- when it left our warehouse. if you discover the cess! machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

  • Page 17: Inventory

    B. hanger ............1 c. Center panel ..........1 D. Filter 16" x 20" x 2" (h2935) ....... 1 Filter 16" x 25" x 2" (h2936, not shown) ... 1 E. Filter 16" x 20" x 1 (h2935) ......1 Figure 4.

  • Page 18: Hardware Recognition Chart

    Hardware Recognition chart -15- Model h2935/h2936 (Mfg. since 2/12)

  • Page 19: Site Considerations

    Filter 16" x 20" x 1" ..........1 some residential floors may require additional Filter 16" x 20" x 2"(h2935) ....... 1 reinforcement to support both the machine and Filter 16" x 25" x 2"(h2936) ....... 1 operator.
  • Page 20 Figure 10. left panel installed. Figure 8. installing downdraft plates. Align the center panel and rear sanding table hinges, and secure with three pins as shown in Figure 9. pins Figure 11. right panel installed. -17- Model h2935/h2936 (Mfg. since 2/12)

  • Page 21: Test Run

    ON. the hole in the right-hand side of the cabinet. 10. Move the switch to the oFF position and insert the safety switch key into the switch. -18- Model h2935/h2936 (Mfg. since 2/12)

  • Page 22: Section 4: Operations

    OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training. Figure 15. dust drawer.

  • Page 23: Operation

    Note: Use the power cord hanger (Figure 16) to move long cords out of the way so they do not interfere with the workpiece. To use the Model H2935/H2936: Two portable electric sanders can be plugged in and operated simultaneously. However, each place the panels in the upright position sander must draw 3.5 amps or less.

  • Page 24: Section 5: Accessories

    ACCEssoriEs SEcTION 5: AccESSORIES H2452—1" prefilter for H2935 H4937—16" x 20" x 2" Filter for H2935 H4961—1" prefilter for H2936 H4938—16" x 25" x 2" Filter for H2936 Figure 17. Model h2452. Figure 19. Model h4937. H3120—palm Detail Sander G5970—Electric palm Sander...

  • Page 25: Section 6: Maintenance

    Note: Generally this technique will work two Cleaning the Model h2935/h2936 is relatively or three times, then you will have to replace easy. Vacuum excess sawdust, and wipe off the the filter.

  • Page 26: Section 7: Service

    1. dust collection drawer is full. 1. Empty collection drawer. collect dust; poor performance. 2. Filter is dirty. 2. Knock dust off filter. if this has no effect, replace with new filter unit. -23- Model h2935/h2936 (Mfg. since 2/12)

  • Page 27: H2935/H2936 Electrical Components

    H2935/H2936 Electrical components Figure 21. switch wiring. Figure 23. Capacitor. Figure 22. Motor wiring. -24- Model h2935/h2936 (Mfg. since 2/12)

  • Page 28: H2935/H2936 Wiring Diagram

    Circuit Breaker 120V Outlet Disconnect power before working on wiring. ON/OFF Switch 120V Outlet see Figure 21. Ground see Figures 22 & 23. Ground Ground Capacitor 45MFD 5-15 Plug 250VAC 120 VAC MOTOR Neutral -25- Model h2935/h2936 (Mfg. since 2/12)

  • Page 29: H2935 Parts Breakdown

    H2935 parts Breakdown -26- Model h2935/h2936 (Mfg. since 2/12)

  • Page 30: H2935 Parts List

    PANEL PIN PN08 HEX NUT 3/8-16 PH2935053 R CAPACITOR 45M 250V PH2936021 STRAIN RELIEF PB31 HEX BOLT 1/4-20 X 1 PH2936022 POWER CORD PCAP68M CAP SCREW M6-1 X 8 PH2936023 SWITCH PLATE PH2936059 INLET COVER -27- Model h2935/h2936 (Mfg. since 2/12)

  • Page 31: H2936 Parts Breakdown

    H2936 parts Breakdown -28- Model h2935/h2936 (Mfg. since 2/12)

  • Page 32: H2936 Parts List

    HEX NUT 3/8-16 PH2936056 PLASTIC SPACER PH2936021 STRAIN RELIEF PCAP68M CAP SCREW M6-1 X 8 PH2936022 POWER CORD PB88 HEX BOLT 1/4-20 X 1-3/4 PH2936023 SWITCH PLATE PH2936059 INLET COVER G8988 PADDLE SWITCH 110/220V WITH KEY -29- Model h2935/h2936 (Mfg. since 2/12)

  • Page 33: Safety Label Placement And Parts List

    MuST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REpLAcE that label before using the machine again. contact Grizzly at (800) 523-4777 or www.grizzly.com to order new labels. -30-...

  • Page 34: Warranty And Returns

    WARRANTy AND RETuRNS grizzly industrial, inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. this warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
  • Page 35 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 36 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...
  • Page 37 Buy Direct and Save with Grizzly – Trusted, Proven and a Great Value! ® ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777...

This manual is also suitable for:

H2936

Table of Contents