Grizzly H3120 Maintenance

MAINTENANCE
General
Regular periodic maintenance on your
Model H3120 Palm Sander will ensure its
optimum performance. Make a habit of
inspecting your sander each time you use
it. Check for the following conditions and
repair or replace when necessary:
1. Loose fasteners.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Worn or damaged sanding pad.
5. Any other condition that could hamper
the safe operation of this machine.

Keeping Tool Clean

Your Model H3120 Palm Sander will give
you years of trouble free service if you
keep it clean and free of built-up dust or
grime. Ensure that no air passages get
blocked. If they do, blow them out with
compressed air. WARNING: Wear safety
glasses when cleaning tool with com-
pressed air.
Plastic parts can easily be cleaned with a
damp cloth, but never use water to clean
any electrical parts. Solvents should also
be avoided on plastic because of the pos-
sibility of damage.
If possible, use a scraper to remove glue
or sap from your work; these elements
may hinder the effectiveness of the abra-
sive sheets and cause unnecessary build-
up of grime on the sander.
H3120 Palm Sander
Repair and Service
All quality tools will eventually wear from
normal use. Since this sander is encased
in an insulated plastic cover, leave repair
and service issues to a qualified service
technician. This includes brush replace-
ment, lubrication or any other internal
operation.
Disassembly and improper reassem-
bly of this device can result in elec-
trical shock danger. Always have this
device serviced by a qualified electri-
cal repair technician. Serious injury
will result.
For replacement parts, find the part you
are looking for below and phone (570) 546-
9663.
REF PART# DESCRIPTION
1 PH312001 MOTOR BRUSH
2 PH312002 SWITCH
3 PH312003 HOOK & LOOP PAD
4 PH312004 DUST BAG
5 PH312005 VACUUM ADAPTER
6 PH312006 CARRYING CASE
3
2
1
5
6
4
-5
-