Configuration; Camera; Image - Provision ISR I5PT-320IPMX10-P User Manual

6) Configuration

Click "configuration" to enter the configuration interface:
a. Camera
i. Image
From this interface you can set the video image settings.
• "Sharpness": Set the general image brightness. This will be done
digitally and not affect the exposure values.
• "Contrast": Set the contrast of the video colors
• "Saturation": Higher saturation gives more vivid colors, but might
look artificial. Lower saturation will result in dull colors.
• "Sharpness": Higher sharpness the image edge is clearer, while it
could not be said the higher the sharpness, the better image
quality, high sharpness can make the picture look distorted.
• "W/B Mode": Set the white balance of the camera (Auto or
Manual)
• "Power Frequency": Set the power frequency in your region to
prevent light flickering.
"Forced Anti-flicker": In some cases, there might be flickering even if the power
8