Service Ports; Event; Motion Detect - Provision ISR I5PT-320IPMX10-P User Manual

ii. Service Ports:
This interface contains all the ports required for the camera work. If some of the ports are not in
use, it is advisable to disable it.
Note： Please reboot the IP camera after modifying the parameters.
d. Event
i. Motion Detect
The camera can detect motion on the scene based on pixel change.
Enable/disable the motion detection as required. Note that if the NVR is set to record motion,
the motion detection must be enabled on the camera side.
Schedule:
Set the motion detection schedule as required. Click on the "Setup" button to open the following
12