Table of Contents
Advertisement
Before using your wine cabinet
Remove the exterior and interior packing.
•
Before connecting the wine cabinet to the power source, let it stand upright for
•
approximately 12 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
•
These appliances cannot be disposed of with general waste. When disposing of your
•
appliance, please choose an authorised disposal site.
Installation of your wine cabinet
Place your wine cabinet on a floor that is strong enough to support it when it is fully
•
loaded. To level your wine cabinet, adjust the front levelling leg at the bottom of the
cabinet.
This appliance is using flammability refrigerant. Never damage the cooling pipework
•
during the transportation. Locate the Wine cooler away from direct sunlight and sources
of heat (stove, heater, radiator, etc.). Never clean appliance parts with flammable fluids.
The fumes can create a fire hazard or explosion. When disposing your appliance, please
choose an authorized disposal site.
Avoid locating the unit in moist areas.
•
Plug the wine cabinet into an exclusive, properly installed-grounded wall outlet. Do not
•
under any circumstances cut or remove the third (ground) pin from the plug. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorised Caple service centre.
Attention
Store wine in sealed bottles
•
Do not overload the cabinet
•
Do not open the door unless necessary
•
Do not cover shelves with aluminium foil or any other shelf material which may prevent air
•
circulation
Should the wine cabinet be stored without use for long periods it is suggested, after a
•
careful cleaning, to leave the door ajar to allow air to circulate inside the cabinet in order
to avoid possible formations of condensation, mould or odours.
This appliance is intended to be used in household and similar applications such as:
•
- Farm houses and other residential type environments;
- Bed and breakfast type environments;
- non-retail applications
Warning: Keep ventilation openings, in the appliance enclosure or in the built-in structure,
•
clear of obstruction;
Warning: Do not use mechanical devices or other means to accelerate the defrosting
•
process, other than those Recommended by the manufacturer;
Warning: Do not damage the refrigerant circuit;
•
Warning: Do not use electrical appliances inside the food storage compartments of the
•
appliance, unless they are the type recommended by the manufacturer.
Installation instructions
4
Advertisement
Table of Contents
