Ozito QSS-1000U Original Instructions Manual

Orbital sander

Advertisement

Quick Links

ORBITAL
SANDER
/
SHEET
1
4
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage:
230-240V ~ 50Hz
Power:
135W
No Load Spead:
13,000/min
Pad Shape:
1
/
Sheet
4
Pad Size:
(110x100mm)
Weight:
0.9kg
ozito-diy.co.uk
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectification of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
WARRANTY
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts fitted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WHAT'S IN THE BOX
Quarter Sheet Sander
Dust Bag
Sand Paper x 3
Paper Punch Plate
QSS-1000U
0716

Advertisement

Table of Contents
loading

Summary of Contents for Ozito QSS-1000U

  • Page 1 Weight: 0.9kg ozito-diy.co.uk Paper Punch Plate QSS-1000U WARRANTY All of our products undergo strict quality checks to ensure that they reach - Damage to the device or parts of the device caused by normal or natural you in perfect condition. In the unlikely event that your device develops a wear or tear or by normal use of the device.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION 1. SANDING SHEET FITMENT QUARTER SHEET SANDER 1 On/Off Switch Sure Grip Handle Ensure the tool is disconnected from the power supply 2 Hook & Loop Backing Pad Spring Clamp before performing any of the following operations. The holes on the bottom of the sanding pad allow the dust bag to draw the sanding dust away from the work area.
  • Page 3 3. DUST BAG 2. PAPER PUNCH PLATE Install Use the punch to create dust extraction holes on the sandpaper which align with the holes on the sander. 1. Push the dust bag onto the dust 1. Fit the sanding sheet to the sander. extraction port aligning the locking tab and rotate.
  • Page 4: Operation

    OR OTHER OBJECTS. 2. To turn the sander off, press the on/off button again. 3. For optimum results, use backward and forward strokes. Note: Keep the entire sanding pad in contact with the workpiece at all times during sanding. QSS-1000U...
  • Page 5: Maintenance

    MATERIAL APPROPRIATE GRIT Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the sander by an unauthorised person or by Coarse Sanding Fine Sanding mishandling of the sander.
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY WARNING! If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available When using mains-powered tools, basic safety precautions, including the through the service organization. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.
  • Page 7 Additonal operating & safety instructions Orbital Sander the following product Please note that the following parts of this product are subject to normal or natural wear and that the 1/4 Sheet Orbital Sander QSS-1000U (Ozito) following parts are therefore also required for use as consumables. 2014/29/EU...
  • Page 8 Items supplied Sound and vibration Caution! Please check that the article is complete as Sound and vibration values were measured in Residual risks specified in the scope of delivery. If parts are accordance with EN 60745. Even if you use this electric power tool in ac- missing, please contact our service center or the cordance with instructions, certain residual sales outlet where you made your purchase at...

Table of Contents