Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Related Manuals for Ozito OZBP110WA
Summary of Contents for Ozito OZBP110WA
- Page 1 WHAT’S IN THE BOX BUFFER POLISHER 110W Buffer Polisher INSTRUCTION MANUAL SPECIFICATIONS Voltage: 230-240V ~ 50Hz Power: 110W No Load Spead: 3,200/min Applicator Bonnet Buffing Pad Diameter: 240mm (10”) Orbital Diameter: 12.7mm (1/2”) & Polishing Bonnet Weight: 3.65kg ozito.com.au OZBP110WA...
- Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION BUFFER POLISHER 1. ADJUSTING THE HANDLES 1 Motor cover 5 Foam pad 2 Motor housing 6 On/Off switch WARNING: ENSURE THE TOOL IS TURNED OFF AND 3 Adjustable handle knobs 7 Cordset DISCONNECTED FROM THE POWER SUPPLY BEFORE PERFORMING ANY OF THE FOLLOWING OPERATIONS.
- Page 3 OPERATION 3. SWITCHING ON & OFF 2. ATTACHING THE BONNETS Attaching the Bonnet WARNING: THE POWER SUPPLY FOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT 1 Pull the bonnet over one DEVICE RATED AT 30mA OR LESS. side of the foam pad. Before Polishing Test a small inconspicuous area of the surface.
- Page 4 Do not apply excessive force to the polisher. Allow the polisher to do the work. polisher to do the work. Note: If the polish seems too difficult to buff, you may have Note: Never use the polishing bonnet to apply polish to a applied too much polish. surface. OZBP110WA...
- Page 5 Spare parts can be ordered from the Special Orders Desk Note: Ozito Industries will not be responsible for any damage or injuries at your local Bunnings Warehouse. caused by the repair of the polisher by an unauthorised person or by mishandling of the polisher.
- Page 6 Model No. OZBP110WA How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse. If you have any further questions, please contact Ozito Customer Service on: Australia: 1800 069 486 New Zealand: 0508 069 486...
- Page 7 Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
- Page 8 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0714...
Need help?
Do you have a question about the OZBP110WA and is the answer not in the manual?
Questions and answers