Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ozito THIRD SHEET SANDER
Summary of Contents for Ozito THIRD SHEET SANDER
- Page 1 WHAT’S IN THE BOX THIRD SHEET Third Sheet Sander SANDER SHEET Dust Bag INSTRUCTION MANUAL SPECIFICATIONS Motor: 150W No Load Spead: 11,000 opm Sandpaper Sheet Pad Size: Sheet (187x90mm) Weight: 1.02kg ozito.com.au Paper Punch Plate TSS-3100...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT SETUP & PREPARATION 1. SANDING SHEET FITMENT THIRD SHEET SANDER 1 Soft Grip On/Off Switch Ensure the tool is disconnected from the power supply before 2 Hook & Loop Backing Pad Spring Clamp performing any of the following operations. - Page 3 3. DUST BAG 2. PAPER PUNCH PLATE Install Use the punch to create dust extraction holes on the sandpaper which align with the holes on the sander. 1. Push the dust bag onto the dust 1. Fit the sanding sheet to the sander. extraction port aligning the locking tab and rotate.
-
Page 4: Operation
OPERATION 4. ON/OFF SWITCH 5. SANDING The tool is recommended for use with a residual current device with a rated residual current of 30mA or less. 1. Secure the material to be sanded. 1. Connect the tool to the mains power supply. 2. -
Page 5: Maintenance
MATERIAL APPROPRIATE GRIT Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the sander by an unauthorised person or by Coarse Sanding Fine Sanding mishandling of the sander. - Page 6 Tool: 1/3 Sheet Orbital Sander SPARE PARTS Model No. TSS-3100 4 5 6 7 8 9 The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No.
-
Page 7: Electrical Safety
The electric motor has been designed for 230V and 240V only. Always check that the power supply Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the corresponds to the voltage on the rating plate. extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock. -
Page 8: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0812...
Need help?
Do you have a question about the THIRD SHEET SANDER and is the answer not in the manual?
Questions and answers