Ozito ROS-4000 Instruction Manual
  1. Manuals
  2. Brands
  3. Ozito Manuals
  4. Sander
  5. ROS-4000
  6. Instruction manual

Ozito ROS-4000 Instruction Manual

450w random orbital sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

RANDOM
ORBITAL
SANDER
450W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage:
230-240V~50Hz
Motor:
450W
No Load Spead:
12,000/min
Pad Size:
125mm
Paper Fitment:
Hook & Loop
Weight:
2.0kg
ozito.com.au
WHAT'S IN THE BOX
Random Orbital Sander
Sand Paper
ROS-4000

Advertisement

Table of Contents
loading

Related Manuals for Ozito ROS-4000

Summary of Contents for Ozito ROS-4000

  • Page 1 WHAT’S IN THE BOX RANDOM ORBITAL Random Orbital Sander SANDER 450W INSTRUCTION MANUAL Sand Paper SPECIFICATIONS Voltage: 230-240V~50Hz Motor: 450W No Load Spead: 12,000/min Pad Size: 125mm Paper Fitment: Hook & Loop Weight: 2.0kg ozito.com.au ROS-4000...

  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION 1. SANDING PAPER FITMENT RANDOM ORBITAL SANDER 1 Adjustable Front Handle 4 On/Off Switch Ensure the tool is disconnected from the power supply 2 Handle Locking Knob 5 Dust Canister before performing any of the following operations. 3 Hook &...

  • Page 3: Operation

    OPERATION 2. ADJUSTING THE FRONT HANDLE 3. DUST CANISTER 1. Push the dust canister onto the dust extraction port. 1. Turn the handle locking knob anti- clockwise to loosen. 2. To remove, pull the dust canister away from the extraction port. 2.

  • Page 4: Switching On And Off

    3. For optimum results, use either one of the strokes 2. To turn the sander off, slide the on/off switch backward. Side to Side Backward/ Forward CAUTION: GUIDE THE CORD DURING SANDING TO PREVENT IT BEING CAUGHT ON THE WORKPIECE, OR OTHER OBJETS. ROS-4000...

  • Page 5: Maintenance

    Veneer brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the sander by an unauthorised person or by Note: If intermediate sanding is required, choose a grit rating between coarse and mishandling of the sander.
  • Page 6 Model No. ROS-4000 Tool: SPARE PARTS Model No. The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. Switch SPROS4000-06 Carbon Brushes...

  • Page 7: Electrical Safety

    Replace the extension lead if damaged or defective. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.

  • Page 8: Warranty

    • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 0414...

This manual is also suitable for:

Random orbital sander

Table of Contents