Jumper Settings - Intel VIA K8T800 User Manual

Installation

3-2 Jumper Settings

Page 3-6
JCMOS:
1
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from “1-2” to “2-3” position for
a few seconds.
3. Replace the jumper on to the “1-2” position.
4. Turn on the system and hold down the <Del> key
to enter BIOS setup.
Settings:
1-2: Normal (Default)
2-3: Clear CMOS