Measures Before Operating - Volvo ECR50D Operator's Manual

Measures before operating

Measures before operating
For safety, observe the following rules.
- Read the Operator's manual.
- Carry out daily service, see page
weather, make sure that the freezing point of the
coolant is sufficiently low and that the lubricating
oil is intended for winter use.
- Clean / scrape ice off the windows.
- Clean the dust around engine, battery and cooler.
- Check the level of hydraulic fluid, refill if required.
V1065709
- Check that there is sufficient fuel in the fuel tank.
- Check that there are no faulty, loose parts or
leaks, which can cause damage.
- Check that the battery disconnected switch is
switched on.
- Check for cracks on frame and tracks.
- Check that hoods and covers are closed.
- Make sure fire extinguisher if equipped is fully
charged.
- Inspect steps and handholds for damage or loose
parts. Make necessary repairs if needed.
- Check that there are no persons in the vicinity of
the machine.
- Adjust the operator seat and fasten the seat belt.
- Adjust and clean the mirrors.
- Inspect working and other lights for proper
operation.
- Travel alarm should be on before operating the
machine.
- Inspect the failure of gauges in the instrument
panels.
- Check the function of the attachment bracket
(optional attachment).
Operating instructions
174 . In cold
73