Lutron Electronics CO2-9904SD Operation Manual page 27

8-8 Set the alarm value
When the lower display show " AL "
1) Use the "
▲
( 3-6, Fig. 1 ) to adjust the Alarm value.
2) After set the Alarm value, press the " Enter Button "
( 3-4, Fig. 1 ) will save the Alarm value with default.
* Remark :
For the O2 function. if the measurement Air oxygen
value is < 18.0 %O2, the buzzerwill sound for warning.
8-9 ESC
When the display show " ESC "
When the Display show the text " ESC ", then press the
" SET Button " ( 3-8, Fig. 1 ) or " ESC Button " ( 3-3, Fig. 1 )
will finish the Advanced Setting procedures.
Remark :
During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
Special advanced setting
( only available for the CO2 function )
8-10 Set the CO2 hight compensation value ( meters )
When the lower display show " hIgh- "
1) Use the "
▲
( 3-6, Fig. 1 ) to adjust the CO2 height compensation
value ( meters ) .
2) After set the Alarm value, press the " Enter Button "
( 3-4, Fig. 1 ) will save the CO2 height compensation
( meters ) value with default.
Button " ( 3-5, Fig. 1 ) or "
Button " ( 3-5, Fig. 1 ) or "
25
Button "
▼
Button "
▼