Lutron Electronics CO2-9904SD Operation Manual page 26

8-6 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " dEC "
1) Use the "
▲
( 3-6, Fig. 1 ) to select the upper text to " USA " or
" Euro ".
USA - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2) After select the upper text to " USA " or " Euro ",
press the " Enter Button " ( 3-4, Fig. 1 ) will save the
setting function with default.
8-7 Select the Temp. unit to
When the lower display show " t-CF "
1) Use the "
▲
( 3-6, Fig. 1 ) to select the upper Display text to " C " or
" F ".
C - Temperature unit is ℃
F - Temperature unit is ℉
2) After Display unit is selected to " C " or " F ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
Button " ( 3-5, Fig. 1 ) or "
Button " ( 3-5, Fig. 1 ) or "
24
▼
or
℃ ℉
▼
Button "
Button "