Related Manuals for Clarke CCIW160
Summary of Contents for Clarke CCIW160
- Page 1 18V CORDLESS IMPACT WRENCH MODEL NO: CCIW160 PART NO: 4500658 OPERATING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS DL 1021 ISS 2...
-
Page 2: Safety Symbols
INTRODUCTION Thank you for purchasing this CLARKE Cordless Impact Wrench. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS WORK ENVIRONMENT 1. Keep the work area clean and tidy and free from trip hazards. 2. DO NOT wear loose clothing or jewellery. Tie long hair out of the way. 3. If wearing gloves, make sure that there is no frayed material that could catch in rotating parts. -
Page 4: Impact Wrench Safety Instructions
14. NEVER attempt any repairs yourself. If you have a problem with this product contact your local CLARKE dealer. 15. ALWAYS use an approved cable extension suitable for the power rating of the battery charger (see specifications), the conductor size should also be at least the same size or larger than that on the charger. -
Page 5: Environmental Protection
stipulated by local regulations. DO NOT incinerated battery as it may explode when exposed to fire. DO NOT attempt to open, disassemble, modify or service a battery pack. 5. Handle batteries so as to avoid damage, fire, corrosion or personal injury. 6. -
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. The battery charger for this product is provided with a standard 5 amp, 230 volt (50Hz), BS 1363 plug, for connection to a standard, domestic electrical supply. -
Page 7: Product Overview
PRODUCT OVERVIEW The CCIW160 is a cordless impact wrench which is rechargeable using the mains charging unit. The key design features are shown above. Upon receipt, check the components against the following list. Any damage or deficiency should be reported to your CLARKE dealer immediately. -
Page 8: Battery Charging
BATTERY CHARGING The battery will have been shipped in a low charge state and will require charging before first time use. 1. Press the battery release clip on the front of the battery pack. 2. Slide the battery pack from the impact wrench. -
Page 9: Operation
NOTE: On the rear of the battery are 3 red power indicator lights. Press the power indicator button to show how much power the battery has. • 1 Light: Low power • 2 Lights: Medium power • 3 Lights: High power The battery pack should slide in easily. - Page 10 FORWARD/REVERSE/LOCK SELECTION 1. Select the direction of operation by pushing the selector bar in the appropriate direction. • The direction of rotation is shown on the end face of the selector bar. • When the selector bar is in the central position the trigger is in neutral/locked.
-
Page 11: Maintenance
Keep the unit clean by wiping with a dry cloth. DO NOT use solvents as a cleaning agent. Your CLARKE impact wrench has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the unit to your local CLARKE dealer. -
Page 12: Component Parts List
1700726 CIS12/6SB 6 Piece Impact Spline Bit Set - 1/2” Drive 1700732 CIS12/3M 3 Piece 1/2” Drive Non Slip Impact Socket Set 1800311 CIS12/17B 16 Piece Deep Impact Socket Set 1800350 CIS12/7DM 7 Piece 1/2”Universal Joint Deep Socket Set 1800141 CHT141 1/2”... -
Page 13: Component Parts Diagram
COMPONENT PARTS DIAGRAM Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 14 3 Amp Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 15: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...