Huawei FusionModule1000A40 Product Description page 67

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Figure 3-47 Smart ETH gateway
(1) PWR_IN cascading
power port
(5) 48V_OUT1 power
output port
(9) BLINK button
Specifications
Table 3-45 Technical specifications for a smart ETH gateway
Item
Power input
Power
output
FE port
PoE port
BLINK
button
Issue 03 (2021-02-10)
(2) FE_1 cascading
signal port
(6) 48V_OUT2 power
output port
(10) Status indicator
Specifications
PWR_IN D-type power input terminal, for power cascading, input
voltage range: 45–55 V DC
Power of a single smart ETH gateway: max (2.7 A, 48 V DC);
power of cascaded smart ETH gateways: max (25 A, 48 V DC)
● PWR_OUT D-type power output terminal, for power
cascading, output voltage range: 45–55 V DC
● 48V_OUT1 and 48V_OUT2, terminal (1 A, 48 V DC), output
voltage range: 45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M
communication rate, for the cascading between smart ETH
gateways and the communication with the upper computer
Four PoE ports, RJ45 terminal with an indicator, 10/100M
communications rate, complying with IEEE802.3, IEEE802.3u,
IEEE802.3af/at
If you press the BLINK button, the RUN indicator blinks
intermittently at super short intervals (blinking at super short
intervals for 0.5s and then off for 0.5s) for 5 seconds.
Copyright © Huawei Technologies Co., Ltd.
(3) POE_1–2 ports (4) POE_3–4 ports
(7) FE_2 cascading (8) PWR_OUT
signal port cascading power port
3 Architecture
61