Huawei FusionModule1000A40 Product Description page 40

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Figure 3-31 Components
(1) External signal port
(4) Drive
(7) Compressor
(10) Refrigerant liquid pipe
(13) Water pan cover
●
●
●
●
●
Issue 03 (2021-02-10)
Compressor
The smart cooling product uses a DC variable-frequency compressor that
features compact size, light weight, a long service life, low noise, easy
installation, high reliability, stability, and energy efficiency.
Oil separator
The oil separator separates the lubricant brought out due to discharge of the
compressor and brings back the separated lubricant to the compressor.
Fan
The energy-efficient EC fan that supports stepless speed adjustment is used to
reduce the fan energy consumption. A single fan is light and easy to maintain.
If a single fan fails, the entire system does not shut down.
Evaporator
The finned-tube evaporator with a high cooling efficiency adopts the synergy
field principle and computational fluid dynamics (CFD) to optimize the flow
path design, which greatly improves the heat exchange efficiency.
EEV
The throttling device uses a miniature controller to control the operation of
the step motor, thereby changing the pass-through area of the EEV to
regulate the flow of refrigerant.
Copyright © Huawei Technologies Co., Ltd.
(2) Electric control box
(5) Wet film humidifier
(8) Drainpipe
(11) Air filter
(14) Water pump
3 Architecture
(3) Module subrack
(6) Differential pressure switch
(9) Refrigerant gas pipe
(12) Fan
(15) Transformer (NetCol5000-
A025HNWE2)
34