Huawei FusionModule1000A40 Product Description page 55

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Item Specifications
RS485 serial port ● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
expansion
● Supports four RS485 ports with the default communications rate of 9600
● COM1–COM3 ports provide 12 V DC power.
● The power supply can be switched on or off and is on by default.
POE expansion Supports two POE (GE) ports for expansion of the POE bus, and supports
network isolation and ring network.
AIDI expansion ● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
(RJ45)
● Provides five universal AIDI ports for connecting to sensors such as smoke
● The power supply can be switched on or off and is on by default.
DO expansion ● Output voltage: 13–15 V DC (rated voltage: 14.5 V DC)
(RJ45)
● One DO port. Supports active DO.
● The power supply can be switched on or off and is on by default.
Fault isolation There are three groups of 12 V ports. A group has a maximum current of 660
mA, a route has a maximum current of 800 mA, and the maximum total
current is 2 A.
Group 1: 12 V of the AIDI_1 and DO/12V ports
Group 2: 12 V of the AIDI_2, COM1/AIDI_4, and COM3/12V ports
Group 3: 12 V of the AIDI_3 and COM2/AIDI_5 ports
Wireless Supports wireless communication that complies with IEEE802.15.4.
communication
4G Supports the 4G module. The ECC800-Pro supports short message service
(SMS) message sending and 4G communication, is compatible with 3G
(WCDMA) communication, and provides a standard SIM card slot.
NOTE
USB ● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module to the ECC800-
● You can insert a USB flash drive to export historical data and
SW Button ● Restoring the default IP address, factory settings, and user information.
● Supports RF_Z networking.
Issue 03 (2021-02-10)
bit/s.
sensors, water sensors, and NTC sensors. AIDI_1 to AIDI_3 are full-function
AIDI ports, and AIDI_4 to AIDI_5 are simplified AIDI ports without type
identification.
The prerequisite for using a SIM card is that the site has signal coverage.
Pro using the app on the mobile phone or tablet computer to view the
basic information about the smart module, such as layout, resources,
energy efficiency, environment, and alarms.
configuration files and import configuration files.
Copyright © Huawei Technologies Co., Ltd.
3 Architecture
49