Access Actuator - Huawei FusionModule1000A40 Product Description

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Indicators
Table 3-46 Indicators on a smart ETH gateway
Indicator
PWR
RUN
ALM

3.4.7 Access Actuator

The access actuator is the control component for the aisle door in a smart module.
It connects to the ECC800-Pro controller over FE port, wireless networking
(802.15.4). It opens the magnetic lock by detecting the card swiping information
of the card reader, door open button information, and fire linkage information. It
has access right management, access event record, and alarm record functions.
Issue 03 (2021-02-10)
Color Name
Green Power
input status
indicator
Green Module
running
status
indicator
Red Alarm
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power supply is
abnormal.
Blinking at The smart ETH gateway
long successfully registers with
intervals the ECC800-Pro and the
software runs properly
(the indicator blinks at 0.5
Hz, on for 1s and then off
for 1s).
Blinking The indicator blinks at
super short intervals for
0.5s (blinking at 10 Hz, on
for 0.05s and then off for
0.05s) and then turns off
for 0.5s. The cycle lasts for
5s.
Steady on The PoE output current is
overloaded.
Off The PoE output is normal
or not connected.
3 Architecture
62