Cooling System; Overview - Huawei FusionModule1000A40 Product Description

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Table 3-10 Technical specifications
Item
External dimensions (H x W x D)
Rated operating voltage
Rated frequency
Rated operating current
Input switch
Output switch
Operating temperature
Operating humidity
Installation mode
Cabling mode

3.3 Cooling System

3.3.1 Overview

Half-sized variable frequency air cooled smart cooling products are used in the
cooling system. The smart cooling products and cabinets form hot (cold) aisle
containments to isolate hot air from cold air. Air flows in from the rear and out of
the front. Smart cooling products cool hot air from servers and generate cold air
for servers. The features are as follows:
●
●
●
●
Issue 03 (2021-02-10)
Smart cooling products are deployed close to heat sources and provides
horizontal airflow. This mechanism shortens the air supply distance, reduces
airflow pressure loss, and minimizes cold air leakage during air supply,
thereby improving the cooling efficiency.
Teamwork control ensures that smart cooling products work in reasonable
mode to improve efficiency.
Precision smart cooling products with constant temperature and humidity and
those with cooling only can collaborate to dynamically control the
temperature and humidity inside the pre-fab. module.
Fresh air fans are deployed to introduce fresh air from outside of the module
to ensure the fresh air ventilation volume required by the personnel inside the
module.
Copyright © Huawei Technologies Co., Ltd.
Specifications
500 mm x 500 mm x 200 mm
208 V AC
60 Hz
10 A
One 10 A/2P switch
Six 6 A/1P switches
–5°C to +40°C
5%–95%
Installed on the wall
Routed in and out from the top
3 Architecture
29