Table of Contents
Advertisement
TO PREVENT SERIOUS INJURY OR DEATH NEVER OPERATE THIS UNIT
UNLESS THE EMERGENCY STOP FUNCTIONS PROPERLY
Your H&S Linewrap is equipped with an
electric emergency stop switch.
This switch is activated by the stop
cable. Activating the emergency stop will
stop all functions of the machine. The
engine will continue to run.
IF THE EMERGENCY STOP IS TRIPPED DURING WRAPPING CYCLE, THE UNIT
MUST BE SWITCHED TO MANUAL OPERATION ON THE CONTROL PANEL. PRESS THE
START/RESET SWITCH, THEN PRESS AND HOLD THE MANUAL PUSHER AND HOOP
SWITCHES TO BEGIN WRAPPING AGAIN, WHILE HOLDING SWITCHES, SELECT
THE DESIRED MODE, AUTOMATIC OR REMOTE ON THE CONTROL BOX TO CONTINUE
NORMAL OPERATION.
If the optional remote handset is used, the
emergency stop may be activated by pressing
the emergency stop button in either the Automatic
or Remote Modes.
SAFETY INFORMATION
W A R N I N G
-12-
Advertisement
Table of Contents
