Hide thumbs Also See for GARUDAN GF-1107-147 MH:
Table of Contents

Advertisement

Quick Links

User's Manual
and Spare Parts Book
GF-1107-147 MH
ANITA B, s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech Republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz
MP02300EN_170818

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GARUDAN GF-1107-147 MH and is the answer not in the manual?

Questions and answers

Summary of Contents for Anita GARUDAN GF-1107-147 MH

  • Page 1 User's Manual and Spare Parts Book GF-1107-147 MH ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP02300EN_170818...
  • Page 2 ANITA © All rights reserved All rights reserved property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2017) MP02300EN_170818...
  • Page 3: Table Of Contents

    ANITA © Content 1. Specification ........................4 2. Installing the oil pan ......................5 3. Adjusting the height of the knee lifter ................6 4. Installing the thread stand ....................6 5. Lubrication ........................7 6. Adjusting the amount of oil in the hook ................8 7.
  • Page 4: Specification

    ANITA © 1. Specification Application Sewing speed 3500 rpm Stitch length 0 ~ 4mm Needle DP×5 9 # ~ 18# By hand lifter 8mm(standard) Presser foot lift By knee lifter 15mm(max.) Hook:White Oil No. 10 Gear Box:Shell Tellus Oil No. 22...
  • Page 5: Installing The Oil Pan

    ANITA © 2. Installing the oil pan 1 The oil pan should rest on the four corners of the machine table groove. 2 Two rubber seats ① for supporting the head portion on the operator side A are fixed on the extended portion of the table by hitting the nails ②, and the other two rubber cushion seats ③...
  • Page 6: Adjusting The Height Of The Knee Lifter

    ANITA © 3. Adjusting the height of the knee lifter Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 1. The standard height of the presser foot lifted using the knee lifter is 10mm.
  • Page 7: Lubrication

    ANITA © 5. Lubrication Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. Fill the oil tank with oil for hook lubrication before the sewing machine. 1. Tilt the machine head until it comes in contact with the head support rod.
  • Page 8: Adjusting The Amount Of Oil In The Hook

    ANITA © 6. Adjusting the amount of oil in the hook Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. Adjustment of the amount of oil in the hook is performed with oil amount adjustment screw.
  • Page 9: Adjusting The Amount Of Oil (Oil Splashes)

    ANITA © 7. Adjusting the amount of oil (oil splashes) Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 1. How to confirm the amount of oil (oil splashes) When carrying out the procedure described below in 2, remove the slide plate and take extreme caution not to allow your fingers to come in contact with the hook.
  • Page 10 ANITA © 2. Sample showing the appropriate amount of oil 1) The amount of oil shown in the samples on the left should be finely adjusted in accordance with sewing processes. Be careful not to excessively increase/ decrease the amount of oil in the hook. (If the amount of oil is too small, the hook will be sized (the hook will be hot).
  • Page 11: Attaching The Needle

    ANITA © 8. Attaching the needle Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. A needle of DBx1 or DPx5 should be used. Select a proper needle size according to the count of thread and the type of material used.
  • Page 12: Setting The Bobbin Into The Bobbin Case

    ANITA © 9. Setting the bobbin into the bobbin case 1. Install the bobbin in the bobbin case so that the thread would direction is clockwise. 2. Pass the thread through thread slit A, B so doing, the thread will pass under the tension spring and come out from notch B.
  • Page 13: Threading The Machine Head

    ANITA © 12. Threading the machine head Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 13. Winding the bobbin thread 1. Insert the bobbin deep into the bobbin winder spindle ①...
  • Page 14: Thread Tension

    ANITA © 5. To adjust the winding amount of the bobbin thread, loosen the setscrew ④ and move the bobbin winder adjusting plate ⑤ to the direction of A or B. Then, tighten the setscrew ④ . To the direction of A: Decrease;...
  • Page 15: Thread Take-Up Spring

    ANITA © 15. Thread take-up spring 1. Changing the stroke of thread take- up spring 1) Loosen setscrew ②. 2) As you turn tension post ③ clockwise (in direction A), the stroke of the thread take-up spring will be increased.
  • Page 16: Adjusting The Thread Take-Up Stroke

    ANITA © 16. Adjusting the thread take-up stroke Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 1. When sewing heavyweight materials, move thread guide ① to the left (in direction A) to increase the length of thread pulled out by the thread take-up.
  • Page 17: Oil Check And Addition

    ANITA © 18. Oil check and addition Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. When the sewing machine running, please check lubricating oil of gear box is sufficient or not. Add sufficient oil in time.
  • Page 18: Adjusting Of The Pedal

    ANITA © 19. Adjusting of the pedal Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 1. Installing the connecting rod Move pedal ③ to the right or left as illustrated by the arrows so that motor control lever ①...
  • Page 19: Pedal Operation

    ANITA © 20. Pedal operation 1. The pedal is operated in the following four steps: 1) The machine runs at low sewing speed when you lightly depress the front part of the pedal B. 2) The machine runs at high sewing speed when you further depress the front part of the pedal A.
  • Page 20: Needle-To-Hook Relationship

    ANITA © 22. Needle-to-hook relationship 1. Turn the hand- wheel to bright the needle bar down to the lowest point of its stroke, and loosen setscrew ①. 2. Adjusting the needle bar height: 1) While using DB needle, align marker line A with bottom end of needle bar lower bushing ③, then tighten setscrew ①.
  • Page 21: Change Of Counter Knife And Moving Knife

    ANITA © 23. Change of counter knife and moving knife MP02300EN_170818...
  • Page 22: Adjustment Of Trimming System

    ANITA © 24. Adjustment of trimming system Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. 25. Sending to the change Warning: turn DFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine.
  • Page 23: Height And Tilt Of The Feed Dog

    ANITA © 26. Height and tilt of the feed dog Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. Height of the feed dog protrudes from the throat plate surface by 0.75 to 0.85mm (1mm for heavy type), Adjust the height in accordance with the material to be used.
  • Page 24: Adjusting The Feed Timing

    ANITA © 27. Adjusting the feed timing Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. The feed timing can be changed by changing the stop position of feed eccentric cam ①.
  • Page 25: Thread Tension Release Releasing Mechanism

    ANITA © 28. Thread tension release releasing mechanism By means of the thread tension release releasing mechanism, sewing can be performed without slacking the needle thread tension even when the presser foot is lifted during sewing. (Even when the presser foot is slightly lifted at the thick overlapped section by the knee lifter, this mechanism can prevent the thread tension from being changed.)
  • Page 26: Micro-Lifting Mechanism Of The Presser Foot

    ANITA © 29. Micro-lifting mechanism of the presser foot Warning: Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine. When sewing velvet or the like which is fluffy, slippage of material of damage of material is reduced by using screw ①...
  • Page 27: Caution When Carrying Or Placing The Sewing Machine

    ANITA © 30. Caution when carrying or placing the sewing machine 1. How to carry the sewing machine. Carry the sewing machine with two person as shown in the figure. Caution: Do not hold the hand-wheel. 2. Caution when placing the sewing machine.
  • Page 29 Control Unit Manual GF-1107-147 MH ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP02300EN_200909...
  • Page 30 APPROVED BY MP02300EN_200909 05PA00001 9. 9. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2020) MP02300EN_200909...
  • Page 31 ANITA © Content 1. Technical Parameters ..................... 4 2. Safety Instructions ......................4 3. Using the Control Panel ....................5 4. User Parameters Setting ....................7 5. Error Messages List ...................... 10 MP02300EN_200909...
  • Page 32: Technical Parameters

    15. Do not operate the machine in a dusty environment or in an environment that is prone to corrosion. Disposal Instructions At the end of the technical service life of the drive unit, hand it over for disposal to ANITA B, s.r.o. or another company dealing with professional disposal of products. MP02300EN_200909...
  • Page 33: Using The Control Panel

    ANITA © 3. USING THE CONTROL PANEL • Sections A, B, C, D, E, F, G, H: increase the number of set stitches Value • Increase the parameter number when selecting a parameter increase • Increase the value when setting the parameter value •...
  • Page 34 ANITA © After depressing the foot-pedal, the machine performs bar-tacking D-times (max. 15 times) and trims the threads. To interrupt the action, Bar-tacking heel back the pedal. To set the D value, press the key. 1. After depressing the foot-pedal the machine will sew sections E, F, G, H.
  • Page 35: User Parameters Setting

    ANITA © 4. USER PARAMETERS SETTING If the control panel is in the default state, press the P key, which is used to enter the parameter settings. The + and - keys are used to select parameters. The S key is used to enter individual parameters and set their value.
  • Page 36 ANITA © Initial Parameter Parameter function Range Description setting End back-tacking activation Not applicable for GF-1107, valid for different mode selection models Foot-pedal position: Start of sewing Foot-pedal position: 30-1000 Sewing stop Service settings – do not change Foot-pedal position:...
  • Page 37 ANITA © Initial Parameter Parameter function Range Description setting N01 The control system version number N02 The panel version number N03 Speed N04 The pedal AD Information display N05 The mechanical angle (up position) N06 The mechanical angle (down position)
  • Page 38: Error Messages List

    ANITA © 5. ERROR MESSAGES LIST Code Error description Solution Power supply error: Over-current or over-voltage Turn off the machine and check the power supply voltage. If the error persists, please replace the Power supply error: control-box or call for customer service.
  • Page 39 ANITA © MP02300EN_200909...
  • Page 41 Katalog náhradních dílů Spare Parts List GF-1107-147 MH ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP02300_200909...
  • Page 42 Anita B s r.o. zakázáno. Copyright © Anita B s r.o. (2020) All rights reserved All rights reserved property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2020) MP02300_200909...
  • Page 43 ANITA © CONTENT/OBSAH 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (1/2) ........4 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (2/2) ........6 2. MAIN SHAFT & THREAD TEKE-UP COVER COMPONENTS ..........8 3. HORIZONTAL FEED & VERTICAL FEED AND HOOK DRIVING SHAFT COMPONENTS (1/2) 10 3.
  • Page 44: Machine Frame & Miscellaneous Cover Components (1/2)

    ANITA © 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (1/2) MP02300_200909...
  • Page 45: Machine Frame & Miscellaneous Cover Components (2/2)

    ANITA © 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (1/2) REF. NO PART. NO NAME OF THE PART 20003404 Side plate 10008972 Screw SM3/16"x28 L=10 10022343 Arm Thread Guide 10008972 Screw SM3/16"x28 L=10 20003407 Thread Take- up Lever Cover 10012147...
  • Page 46 ANITA © 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (2/2) MP02300_200909...
  • Page 47 ANITA © 1. MACHINE FRAME & MISCELLANEOUS COVER COMPONENTS (2/2) REF. NO PART. NO NAME OF THE PART 10012136 Rubber Plug 10012139 Rubber Ring 10012141 Air-discharging 10012867 Thread Tension Guide 10011313 Screw M6x12 10022344 Revers Feed Solenoid Base 10013621 Revers Feed Lever Stopper...
  • Page 48: Main Shaft & Thread Teke-Up Cover Components

    ANITA © 2. MAIN SHAFT & THREAD TEKE-UP COVER COMPONENTS MP02300_200909...
  • Page 49 ANITA © 2. MAIN SHAFT & THREAD TEKE-UP COVER COMPONENTS REF. NO PART. NO NAME OF THE PART 10012613 Coupling 10009187 Screw 10011227 Rubber ring 10012615 Coupling 10038017 Motor 10006157 Screw ASM. 10002436 Screw 20010974 Head wheel ASM. 10012497 Cog belt...
  • Page 50: Horizontal Feed & Vertical Feed And Hook Driving Shaft Components (1/2)

    ANITA © 3. HORIZONTAL FEED & VERTICAL FEED AND HOOK DRIVING SHAFT COMPONENTS (1/2) MP02300_200909...
  • Page 51: Horizontal Feed & Vertical Feed And Hook Driving Shaft Components (2/2)

    ANITA © 3. HORIZONTAL FEED & VERTICAL FEED AND HOOK DRIVING SHAFT COMPONENTS (1/2) REF. NO PART. NO NAME OF THE PART 10012490 10012540 Feed bar driving crank 10010074 Screw 10010095 Screw 10012531 Feed bar ASM. 10022849 Feed dog 10010099...
  • Page 52 ANITA © 3. HORIZONTAL FEED & VERTICAL FEED AND HOOK DRIVING SHAFT COMPONENTS (2/2) MP02300_200909...
  • Page 53 ANITA © 3. HORIZONTAL FEED & VERTICAL FEED AND HOOK DRIVING SHAFT COMPONENTS (2/2) REF. NO PART. NO NAME OF THE PART 10005740 Feed drive eccentric cam 10010678 Screw 10012462 Gear 10008862 Screw 10012489 Feed driving shaft 10012533 Oil seal...
  • Page 54: Hang Lifter & Tension Release Components

    ANITA © 4. HANG LIFTER & TENSION RELEASE COMPONENTS MP02300_200909...
  • Page 55 ANITA © 4. HANG LIFTER & TENSION RELEASE COMPONENTS REF. NO PART. NO NAME OF THE PART 10006112 Presser foot ASM. 10010650 Screw 10014141 Bearing support 10013328 Presser bar 10013567 Screw SM11/64"x 40 L=15.8 10011887 Screw SM9/64"x 40 L=4 10013375...
  • Page 56: The Needle Bar Swing Components

    ANITA © 5. THE NEEDLE BAR SWING COMPONENTS MP02300_200909...
  • Page 57 ANITA © 5. THE NEEDLE BAR SWING COMPONENTS REF. NO PART. NO NAME OF THE PART 10022509 Rocking base compl. 10022340 Bushing 10023449 Slide block guide 10003549 Bearing 10014395 Screw M4×14 10023454 Driving link 10022856 Link pin 10022363 Plug 10022354 Screw SM9/64”×...
  • Page 58: Feed Adjust Mechanism Components

    ANITA © 6. FEED ADJUST MECHANISM COMPONENTS MP02300_200909...
  • Page 59 ANITA © 6. FEED ADJUST MECHANISM COMPONENTS REF. NO PART. NO NAME OF THE PART 10013870 10012459 Connecting pin 10013590 Screw 10010092 Screw 10012634 Connecting plate 10012681 Crank 10012629 Shaft sleeve 10012622 Oil seal 10003921 Screw 10012627 Closing ring 10013867...
  • Page 60: Presser Foot Components Of Oil Plate Knee Lift

    ANITA © 7. PRESSER FOOT COMPONENTS OF OIL PLATE KNEE LIFT MP02300_200909...
  • Page 61 ANITA © 7. PRESSER FOOT COMPONENTS OF OIL PLATE KNEE LIFT REF. NO PART. NO NAME OF THE PART 10012632 Oil reservoir 10012631 Knee lifter presser rod 10013102 Head Gasket 10002562 Bracket ASM. 10003896 Bracket 10002610 Screw 10002613 Screw 10024632 Connecting Rod ASM.
  • Page 62: Bobbin Winder Components

    ANITA © 8. BOBBIN WINDER COMPONENTS MP02300_200909...
  • Page 63 ANITA © 8. BOBBIN WINDER COMPONENTS REF. NO PART. NO NAME OF THE PART 10013875 Bobbin winder ASM. 10008773 Rubber ring 10004380 Screw 10013269 Screw 10011149 Thread cutter 10013064 Bobbin thread tension ASM. 10011158 Screw 10011200 Thread guide plate MP02300_200909...
  • Page 64: Automatic Reverse Feed Components

    ANITA © 9. AUTOMATIC REVERSE FEED COMPONENTS MP02300_200909...
  • Page 65 ANITA © 9. AUTOMATIC REVERSE FEED COMPONENTS REF. NO PART. NO NAME OF THE PART 10008934 Screw 10038021 Option Switch ASM. 10034506 Electromagnet ASM. 10012142 Screw 10012587 Washer 10012628 Crank Pin 10013538 Screw MP02300_200909...
  • Page 66: Thread Stand Components

    ANITA © 10. THREAD STAND COMPONENTS MP02300_200909...
  • Page 67 ANITA © 10. THREAD STAND COMPONENTS REF. NO PART. NO NAME OF THE PART 10007130 Thread Stand ASM. 10004282 Column Cap 10004293 Column Pipe(Upper) 10003301 Screw M5x14 10003022 Washer 10002953 Nut M5 10004289 Thread Guide Pipe 10004285 Thread Guide Bushing...
  • Page 68: Wiper Components

    ANITA © 11. WIPER COMPONENTS MP02300_200909...
  • Page 69 ANITA © 11. WIPER COMPONENTS REF. NO PART. NO NAME OF THE PART 10034507 Wiper ASM. 10012631 Screw MP02300_200909...
  • Page 70: Thread Trimmer Components (Rotation Knife) (1/2)

    ANITA © 12. THREAD TRIMMER COMPONENTS (ROTATION KNIFE) (1/2) MP02300_200909...
  • Page 71: Thread Trimmer Components (Rotation Knife) (2/2)

    ANITA © 12. THREAD TRIMMER COMPONENTS (ROTATION KNIFE) (1/2) REF. NO PART. NO NAME OF THE PART 10011422 Screw SM 9/6 4"×40 L = 4 10011421 Fixed Knife 10011497 Screw SM11/64"×40 L=9 10013154 Washer 10011584 Dispart Thread Shuttle 10013333 Screw SM3/1 6 "×3 2L = 1 4...
  • Page 72 ANITA © 12. THREAD TRIMMER COMPONENTS (ROTATION KNIFE) (2/2) MP02300_200909...
  • Page 73 ANITA © 12. THREAD TRIMMER COMPONENTS (ROTATION KNIFE) (2/2) REF. NO PART. NO NAME OF THE PART 10011605 Screw SM1/4"x28 L=12 10009471 Nut M4 10006131 Solenoid Base 10013046 Solenoid Connecting Shaft 10011845 Washer 10011606 Washer 10006137 Thread Trimmer Solenoid 10013590 Screw SM11/64"x40 L=4...
  • Page 74: Oil Lubrication Components

    ANITA © 13. OIL LUBRICATION COMPONENTS MP02300_200909...
  • Page 75 ANITA © 13. OIL LUBRICATION COMPONENTS REF. NO PART. NO NAME OF THE PART 10000569 Floater ASM. 10008777 O-ring 10008782 Floateer case 10013048 Pipe stopper 10007806 Oil pipe 10008772 Oil sight window 10008943 Rubber plug 10008780 Oil inlet 10007806 Oil pipe 20007434 Oil filter ASM.
  • Page 76: Accessorie Part Components

    ANITA © 14. ACCESSORIE PART COMPONENTS MP02300_200909...
  • Page 77 ANITA © 14. ACCESSORIE PART COMPONENTS REF. NO PART. NO NAME OF THE PART Accessorie Bag Asm A 10012631 Knee Lifter Presser Rod 10004514 rame Support Bar 10010995 Screw Driver,Middle 10013185 Screw Driver,Small 10005639 Needle Thread Guide ASM 10010994 Screw Driver,Large...

Table of Contents