Table of Contents

Advertisement

Quick Links

User's Manual
and Spare Parts Book
GC-3318-443 MH
ANITA B, s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech Republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz
MP01000EN_160602

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Garudan GC-3317 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Anita Garudan GC-3317 Series

  • Page 1 User's Manual and Spare Parts Book GC-3318-443 MH ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP01000EN_160602...
  • Page 2 ANITA © All rights reserved Property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2016) GC-3317-443 MH...
  • Page 3: Table Of Contents

    ANITA © Content 1. SPECIFICATION ..................4 2. SAFETY MEASURES .................. 5 3. COMMISSIONING THE MACHINE ............. 6 4. PRECAUTION BEFORE USING ..............7 5. INSTRUCTION FOR THE DISPOSAL ............7 6. INSTALLING THE THREAD STAND ............. 8 7. LUBRICATION ................... 8 8.
  • Page 4: Specification

    ANITA © 1. SPECIFICATION Model Usage Max speed Max stitch Needle system Presser foot length & size (knee/lifter) GC-3317-443 MH medium-heavy 2.000 135x17(110-140) 6/15 mm GC-3317-448 MH medium- heavy 2.000 135x17(110-140) 6/15 mm GC-3318-443 MH medium- heavy 2.000 135x17(110-140) 6/15 mm...
  • Page 5: Safety Measures

    ANITA © 2. SAFETY MEASURES Do not put the machine into operation until an appropriate preaparation is carried out by a specialist or an authorised person, and until you get acquainted with safety measures. 1. Any sewing machine may be operated only by a properly trained operator.
  • Page 6: Commissioning The Machine

    ANITA © Important notices Be careful! Never set off the machine without the belt cover, you could be heart. To avoid disorders and damages, i tis necessary to do these: • Before the first setting off, clean and oil the machine properly .
  • Page 7: Precaution Before Using

    5. INSTRUCTION FOR THE DISPOSAL When the machine isn´t possible to run because its technical life give it to the company ANITA B,s.r.o. for its disposal or you can give the machine to another company which is specialised for disposal of product.
  • Page 8: Installing The Thread Stand

    ANITA © 6. INSTALLING THE THREAD STAND Assemble the Thread stand, and insert it in the hole in the machine table, and fix in by tightening nut (1). For ceiling wiring pass the power cord through spool rest rod (2). (fig 1) (fig.1)
  • Page 9: Installing The Belt Cover

    ANITA © 8. INSTALLING THE BELT COVER Install three belt cover supports (1) to the machine. Install the belt cover (2) to the belt cover supports using screws (3). Install the belt cover (4) to the table using the wooden screws (5).
  • Page 10: How To Install The Needle

    ANITA © 10. HOW TO INSTALL THE NEEDLE Be sure to power-off the motor. The normal needle system is „DPx17“. Turn the handwheel by hand and raise the needle bar to its top position. Loosen screw (1) and insert the needle (2) into the hole until it will go no further. Insert the needle with its receess (A) facing directly to the right-hand side.
  • Page 11: How To Thread The Machine Head

    ANITA © 12. HOW TO THREAD THE MACHINE HEAD Thread the machine head as illustrated. (fig.7) (fig.7) GC-3317-443 MH...
  • Page 12: Adjusting The Stitch Length

    ANITA © 13. ADJUSTING THE STITCH LENGTH To adjusting the stitch length push lock plate (1). Align the stitch lenght dial (2) indicator to the line of the lock plate turning stitch length dial counterclockwise or clockwise. Reverse stitching Push the feed lever (3) down. The machine performs reverse feed stitching as long as the lever is held depressed.
  • Page 13: Lifting The Presser Foot

    ANITA © 15. LIFTING THE PRESSER FOOT Turn the hand lifter (1) toward (A), presseer foot up. (fig.10) (fig.10) 16. ADJUSTING THE PRESSER FOOT PRESSURE Turn the presser spring regulator to the right to increase and to the left to decrease pressure.
  • Page 14: Thread Tension

    ANITA © 17. THREAD TENSION Adjusting the needle thread tension Turn the thread tension nut (1) clockwise to increase or counterclockwise to decrease the needle thread tension. (fig.12) Adjusting the bobbin thread tension Turn the tension screw (2) clockwise to increase or counterclockwise to decrease the bobbin thread tension.
  • Page 15: Needle To Hook Relationship

    ANITA © 18. NEEDLE TO HOOK RELATIONSHIP Remove throat plate (3) and hook cover (2). Bring the needle bar down to its lowest point. Loosen the needle bar clamp screw (1). Bring the needle bar up to 2,2 mm from its lowest point turning the handwheel.
  • Page 16: Height Of The Feed Dog

    ANITA © 19. HEIGHT OF THE FEED DOG Standard height of the feed dog is 1,4 mm from the surface of throat plate (2). When the feed dog height needs to be adjusted according the sewing conditions or after the feed dog is replaced, follow the procedure described below.
  • Page 17: Feed Timing

    ANITA © 21. FEED TIMING It is the standard position of feed cam as illustrated. Remove a top cover and change the position of feed cam (1). (fig.16) (fig.16) 22. ADJUSTING THE WALKING FOOT AND PRESSURE FOOT Loosen nut (2). Turn the rod (1) toward (A), walking foot and presser foot up. Toward (B), walking foot and presser foot down.
  • Page 18: Auxiliary Thread Tension Controller

    ANITA © Alternate vertical motions of the walking foot and the presser foot The alternate vertical strokes of walking foot and presser foot are normally equal. Depending on the type of materials, however the vertical stroke of the presser foot may be set smaller than of walking foot.
  • Page 19: One-Touch Type Reverse Feed Stitching Mechanism

    ANITA © 24. ONE-TOUCH TYPE REVERSE FEED STITCHING MECHANISM The moment you press switch (1), the sewingmachine performs reverse feed stitching. The machine continues reverse feed stitching as long as the switch is held pressed. When you release the switch the machine resumes normal stitching.
  • Page 20: Adjusting The Thread Trimming Cam

    ANITA © 26. ADJUSTING THE THREAD TRIMMING CAM Turning the handwheel, aligh black marker dot (1) in the machine arm with white marker dot (2) in the handwheel. Turn the thread trimming cam until first screw (3) in the thread trimming cam aligns with cam roller shaft (4) in the cam roller arm, and tighten screw at the aligned position.
  • Page 21: Trouble And Corrective Measures

    ANITA © 28. TROUBLE AND CORRECTIVE MEASURES Trouble Cause Coorective measures Thread breakage 1. The thread path, needle point, hook point or bobbin case 1 Remove the scratches on the (thread frays or positioning finger has scratches hook point using a fine sand paper.
  • Page 22 ANITA © GC-3317-443 MH...
  • Page 23 Spare Parts List Katalog náhradních dílů GC-3318-443-MH ANITA B, s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz...
  • Page 24 Anita B s r.o. zakázáno. Copyright © Anita B s r.o. (2016) All rights reserved Property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2016)
  • Page 25 ANITA © CONTENT/OBSAH A. FRAME & MISCELLANEOUS COVER COMPONENTS (1/3) ....... 4 A. FRAME & MISCELLANEOUS COVER COMPONENTS (2/3) ....... 6 A. FRAME & MISCELLANEOUS COVER COMPONENTS (3/3) ....... 8 B. MAIN SHAFT & UPRIGHT SHAFT COMPONENTS ........10 C. NEEDLE BAR & THREAD TAKE-UP LEVER COMPONENTS ...... 12 D.
  • Page 26: Frame & Miscellaneous Cover Components (1/3)

    ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENTS (1/3) GC-3318-443 MH...
  • Page 27 ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENTS (1/3) REF.No Note Part No. Name of Part 8703111000 Face Plate ZSB09017 Screw 9/64-40x8 YA035075 8233110900 Vibrating Presser Bar Guide ZSB12006 Screw 3/16-28x10 ZSB15009 Screw 15/64-28x13 8233143700 Bell Crank Guide ZSB12030 Screw 3/16-32x8 F1063-0A Thread Také-up Lever Cover...
  • Page 28: Frame & Miscellaneous Cover Components (2/3)

    ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENTS (2/3) GC-3318-443 MH...
  • Page 29 ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENTS (2/3) REF.No Note Part No. Name of Part 8703110500 Top Cover Asm. ZSB11017 Screw 11/64-40x12 A1013-0A Rubber Plug AXB114001 Felt A1013-0D Rubber Plug A1013-1A Rubber Plug 6120117400 Rubber Plug 8703168000 Arm Side Cover...
  • Page 30: Frame & Miscellaneous Cover Components (3/3)

    ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENTS (3/3) GC-3318-443 MH...
  • Page 31 ANITA © A. FRAME & MISCELLANEOUS COVER COMPONENS (3/3) REF.No Note Part No. Name of Part 87101106K0 Bed Cyrinder Cap ZSB09044 Screw 9/64-40x5,3 8710111301 Throat Plate ZSC11003 Screw 11/64-40x9 6220183600 Hook Cover 8713110400 Cover ZSC09012 Screw 9/64-40x7 YD060056 Oil Pipe...
  • Page 32: Main Shaft & Upright Shaft Components

    ANITA © B. MAIN SHAFT & UPRIGHT SHAFT COMPONENTS GC-3318-443 MH...
  • Page 33 ANITA © B. MAIN SHAFT & UPRIGHT SHAFT COMPONENTS REF.No Note Part No. Name of Part 8713120800 Counterweight ZSB18001 Screw 9/32-28x9,5 ZSB18002 Screw 9/32-28x13 ZSA15019 Screw 15/64-28x3 ZSA15017 Screw 15/64-28x8,5 8110120200 Main Shaft Bushing, Front XB210001 Felt 8233144501 Connecting Rod...
  • Page 34: Needle Bar & Thread Take-Up Lever Components

    ANITA © C. NEEDLE BAR & THREAD TAKE-UP LEVER COMPONENTS GC-3318-443 MH...
  • Page 35 ANITA © C. NEEDLE BAR & THREAD TAKE-UP LEVER COMPONENTS REF.NO Note Patr No. Name of Part Q1070-0A Needle Bar F2076-0A Needle Bar Thread Guide ZSB06002 Screw 3/32-56x2,5 ZSB08002 Screw 1/8-44x4,5 INDP x 17-21 Needle DP x 17-21 8703106100 Thread Také-up Lever Pin...
  • Page 36: Needle Bar Rocking Motion Mechanism Components

    ANITA © D. NEEDLE BAR ROCKING MOTION MECHANISM COMPONENTS GC-3318-443 MH...
  • Page 37 ANITA © D. NEEDLE BAR ROCKING MOTION MECHANISM COMPONENTS REF.No Note Part No. Nane of Part 8610270100 Needle Bar Guide Bracket XA300125 Oil Wick XA300040 Oil Wick B1091-0A Needle Bar Guide Bracket Stud XA300020 Oil Wick ZSA15023 Screw 15/64-28x10 B1285-0A...
  • Page 38: Upper Feed Mechanism Components

    ANITA © E. UPPER FEED MECHANISM COMPONENTS GC-3318-443 MH...
  • Page 39 ANITA © E. UPPER FEED MECHANISM COMPONENTS REF.No Note Part No. Name of Part 8233144702 Feed Rotating Shaft Crank ZSD16007 Screw 1/4-28x16,5 ZMG06019 Screw OAGM111503 Oil Seal WH206009 Washer ZML06001 Nut (M6x1,0) 8703145000 Feed Rotating Shaft Bushing 8233144801 Feed Rocker Shaft...
  • Page 40: Pressure Bar & Knee Lifter Components (1/3)

    ANITA © F. PRESSURE BAR & KNEE LIFTER COMPONENTS (1/3) GC-3318-443 MH...
  • Page 41: Pressure Bar & Knee Lifter Components (2/3)

    ANITA © F. PRESSURE BAR & KNEE LIFTER COMPONENTS (1/3) REF.No Note Part No. Name of Part ZSF32001 Screw ZSN32001 8230150401 Presser Spring 8703150100 Presser Bar 8233150500 Presser Bar Lifter ZSB11086 Screw 11/64-40x18 ZSG16006 Hinge Screw B1274-0A Spring 8233344000 Tension Release Slide...
  • Page 42 ANITA © F. PRESSURE BAR & KNEE LIFTER COMPONENTS (2/3) GC-3318-443 MH...
  • Page 43 ANITA © F. PRESSURE BAR & KNEE FILTER COMPONENTS (2/3) REF.No Note Part No. Name of Part 6220342000 Knee Lifter Crank ZMH08003 Screw M8x1,25x8 ZMH08002 Screw M8x1,25x12 OPP01250 O-rings Ø 12,5 6220344200 Bushing ZSA11007 Screw 11/64-40x7 6220342200 Shaft 8703341600 Knee Lifter Crank...
  • Page 44: Presure Bar & Knee Lifter Components (3/3)

    ANITA © F. PRESURE BAR & KNEE LIFTER COMPONENTS (3/3) GC-3318-443 MH...
  • Page 45 ANITA © F. PRESSURE BAR & KNEE LIFTER COMPONENTS (3/3) REF.No Note Part No. Name of Part 6220118100 Rubber Plug 8703343800 Bushing ZSA11007 Screw 11/64-40x7 8703341701 Knee lifter shaft 8703342900 Knee Lifter Crank (Rear) ZSB15028 Screw 15/64-28x11,5 8703344200 Bushing ZSA11007...
  • Page 46: Lower Feed Mechanism Components (1/2)

    ANITA © G. LOWER FEED MECHANISM COMPONENTS (1/2) GC-3318-443 MH...
  • Page 47 ANITA © G. LOWER FEED MECHANISM COMPONENTS (1/2) REF.No Note Part No. Name of Part 87101713K0 Feed Cam Holder B ZSB11051 Screw 11/64-40x11,5 YD030015 Spring Pin 3,0x15 6220170900 Feed Cam 87101712K0 Feed Cam Holder A 6220171400 Feed Cam Holder Washer...
  • Page 48: Lower Feed Mechanism Components (2/2)

    ANITA © G. LOWER FEED MECHANISM COMPONENTS (2/2) GC-3318-443 MH...
  • Page 49 ANITA © G. LOWER FEED MECHANISM COMPONENTS (2/2) REF.No Note Part No. Name of Part 622189200 Feed Lifting Rock Link ZSJ12009 Screw 3/16-28x15 8703160400 Feed Rocker Shaft 6220160500 Feed Bar Rod ZSA20008 Screw 5/16-24x7 8360188200 Thrust Collar ZSA11004 Screw 11/64-40x3,5...
  • Page 50: Feed Adjustment Mechanism Components (1/2)

    ANITA © H. FEED ADJUSTMENT MECHANISM COMPONENTS (1/2) GC-3318-443 MH...
  • Page 51: Feed Adjustment Mechanism Components (2/2)

    ANITA © H. FEED ADJUSTMENT MECHANISM COMPONENTS (1/2) REF.No Note Part No. Name of Part 6120167000 Reverse Block ZSA15037 Screw 15/64-28x10,5 5371353500 Plate XB320003 Felt ZSB09011 Screw 9/64-40x6,5 EJ4153-0A Guide Plate ZSB11018 Screw 11/64-40x9 6120160600 Bushing ZSA11007 Screw 11/64-40x7 6120167200...
  • Page 52 ANITA © H. FEED ADJUSTMENT MECHANISM COMPONENTS (2/2) GC-3318-443 MH...
  • Page 53 ANITA © H. FEED ADJUSTMENT MECHANISM COMPONENTS (2/2) REF.No Note Part No. Name of Part 8610161100 Feed Regulator 8610162200 Bushing 6120161500 Feed Regulator Shaft YA050100 Stopper Pin XB120001 Felt OPP04440 O-rings Ø 44,4 ZSA15020 Screw 15/64-28x11 8610118200 Rubber Plug ZSB15006...
  • Page 54: Hook Drive Shaft Components

    ANITA © I. HOOK DRIVE SHAFT COMPONENTS GC-3318-443 MH...
  • Page 55 ANITA © I. HOOK DRIVE SHAFT COMPONENTS REF.No Note Part No. Name of Part 8712180100 Hook Driving Shaft 8710180300 Bushing, Front 6220180400 Bushing, Center A4021-0A Screw Gear, Back Q6105-1A Bobbin Case 8703180500 Bushing, Rear ZSA11016 Screw 11/64-40x11 XB205002 Felt E4014-0A...
  • Page 56: Upper Thread Tension Regulator Mechanism Components

    ANITA © J. UPPER THREAD TENSION REGULATOR MECHANISM COMPONENTS GC-3318-443 MH...
  • Page 57 ANITA © J. UPPER THEAD TENSION REGULATOR MECHANISM COMPONENTS REF.No Note Part No. Name of Part EJ1020-0A Thread Tension Regulator Asm. A1038-0A Mounting Plate Asm. EJ1037-0A tension Releasing Plate A1036-0A Tension Releasing Spring ZSG09004 Hinge Screw A1030-0A Thread Guide Disk...
  • Page 58: Accessories

    ANITA © K. ACCESSORIES GC-3318-443 MH...
  • Page 59 ANITA © K. ACCESSORIES REF.No Note Part No. Name of Part C7001-0A Cover A7000-0A Accessory Box A7010-0A Screw driver (small) A7010-1A Screw Driver (middle) A7010-2A Screw Driver (Large) INDP x 17-21 Needle DP x 17-21 A7012-1A Oiler A7012-2A Oil Can...
  • Page 60: Gauge Parts List

    ANITA © L. GAUGE PARTS LIST THROAT PLATE 8710111301 FEED DOG 8710161402 WALKING FOOT 8710151000 PRESSUER FOOT 8710153004 GC-3318-443 MH...
  • Page 61 ANITA © GC-3318-443 MH...

Table of Contents