Table of Contents

Advertisement

Quick Links

GF-1130-4412 MH
GF-2230-4412 MH
ANITA B s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz
User Manual
MP04800EN,MP04900EN_200204

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GARUDAN GF-1130-4412 MH and is the answer not in the manual?

Questions and answers

Summary of Contents for Anita GARUDAN GF-1130-4412 MH

  • Page 1 User Manual GF-1130-4412 MH GF-2230-4412 MH ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP04800EN,MP04900EN_200204...
  • Page 2 4. 2. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...
  • Page 3: Table Of Contents

    © ANITA Content Basic Information ...................... 5 A1. Product description and intended use ................5 A2. Technical specifications ....................5 Safety Instructions ....................6 B1. General instructions ......................6 B2. Installation precautions....................6 B3. Operational safety instructions ..................7 B4. Working safety instructions ..................... 7 B5.
  • Page 4 © ANITA Troubleshooting ...................... 23 Drive Unit Manual ....................24 G1. Safety instructions ......................24 G2. Description and intended use of a drive unit ..............24 G3. Drive unit technical parameters ..................24 G4. Installation ........................25 G4.1. Connector description .................... 25 G4.2.
  • Page 5: A Basic Information

    © ANITA A BASIC INFORMATION A1. PRODUCT DESCRIPTION AND INTENDED USE The machines are designated for use in the apparel, home textiles, accessories and footwear production. It is suitable for making a car seat covers, sofas, leather bags, tents, etc. Triple synchronous feed and special feeder provide smooth operation and even stitch even for heavy materials.
  • Page 6: B Safety Instructions

    © ANITA B SAFETY INSTRUCTIONS Read the instructions carefully before installation and use. Keep this manual for future reference. B1. GENERAL INSTRUCTIONS 1. Do not operate the sewing machine until proper preparation has been made by a technician or qualified person and safety precautions have been taken.
  • Page 7: B3. Operational Safety Instructions

    © ANITA B3. OPERATIONAL SAFETY INSTRUCTIONS 1. Do not use the machine without a belt cover, finger guards or other protective equipment. 2. All protective equipment of the machine must be in place before operation. Do not use the machine without covers and protective equipment.
  • Page 8: B5. Disposal Instructions

    © ANITA 7. Do not work on the machine under the influence of alcohol or drugs. 8. We recommend wearing safety goggles. 9. Do not remove covers or any other safety device while the machine is running. 10. Always turn off the main switch when leaving the machine.
  • Page 9: C Machine Setup

    © ANITA C MACHINE SETUP C1. OIL SUMP INSTALLATION Insert rubber cushions ①, ③, ④ into the bedplate and tighten the screws ②. Installation of the oil sump: According to the picture fasten the oil sump (5) to the plate with eight screws.
  • Page 10: D Operating Instructions

    © ANITA D OPERATING INSTRUCTIONS D1. REPLACING THE NEEDLE Turn off the main power switch. Replace the needle only when the sewing machine is off. For 1-needle machine GF-1130: Turn the hand wheel to rise the needle bar 1 to the highest position.
  • Page 11: D2. Threading The Machine

    © ANITA D2. THREADING THE MACHINE D2.1. Threading the bottom thread 1. Pull the latch up ①. 2. Hold the bobbin with the loose end of the thread in a CCW direction and put it into the hook. 3. Pass the thread through the opening ② and ③ and under the bottom thread tension spring.
  • Page 12: D2.2. Winding The Bobbin

    © ANITA D2.2. Winding the bobbin 1. Put the bobbin on the winding pin. Pass the thread through points ① to ③ and wind the end of the thread a few times around the bobbin. 2. Press the winder lever Ⓐ. Press the foot controller and machine will start winding. When the bobbin is full, winding stops automatically.
  • Page 13: D2.3. Threading The Upper Thread

    © ANITA D2.3. Threading the upper thread 1. Thread the upper (needle) thread of GF-1130-4412 MH as shown in the picture. MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...
  • Page 14 © ANITA 2. Thread the upper (needle) threads of GF-2230-4412 MH as shown in the picture. MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...
  • Page 15: D3. Adjusting The Stitch Length And Reverse Stitch

    © ANITA D3. ADJUSTING THE STITCH LENGTH AND REVERSE STITCH 1. Press the locking plate ③ and set the desired stitch length by turning the dial ①. 2. Press the reverse lever ②, the machine will sew back. When the lever is released, the machine sews forward again.
  • Page 16: D5. Presser Foot

    © ANITA D5. PRESSER FOOT D5.1. Presser foot lift 1. Raise the presser foot lever ① up to a height of 9 mm. 2. Lowering the lift lever will lower the foot. 3. You can also lift the presser foot up to 19 mm using the knee lever or by pressing the pedal backwards.
  • Page 17: D6. Hook Safety Clutch Function

    © ANITA D6. HOOK SAFETY CLUTCH FUNCTION During sewing, when the hook reaches beyond the limit, a safety lock is activated to lock it. The needle will be still moving, but not the hook. Always remove the cause before running.
  • Page 18: D8. Timing Of The Hook And The Needle

    © ANITA D8. TIMING OF THE HOOK AND THE NEEDLE Make the settings below with the stitch length set to 0. 1. Turn the handwheel and raise the needle bar 2.3 mm from the lowest position. Check if the needle ② and the tip of the hook ③ align with each other.
  • Page 19 © ANITA 3. To adjust the distance between the hook tip ③ and the needle ②, loosen the hook block screws ⑥ and the gear screws ⑤. Adjust the distance to 0.05-0.1 mm. Then tighten all screws. 4. Adjust the guard plate of the hook by bending it so that the distance between the plate ⑧...
  • Page 20: E Machine Maintenance

    © ANITA E MACHINE MAINTENANCE E1. LUBRICATING THE MACHINE E1.1. Lubricating the front part of the machine head 1. Loosen the front cover screws. 2. Remove the front cover. 3. Lubricate each day at the marked points. 4. Replace the cover.
  • Page 21: E1.3. Refilling The Oil Sump

    © ANITA E1.3. Refilling the oil sump 1. Place the oil filter head ② on the hose ③ and put it into the oil sump ① as shown. You can attach it using the magnet. 2Add the oil until the cap ② is completely submerged.
  • Page 22: E2. Adjusting The Lubrication

    © ANITA E2. ADJUSTING THE LUBRICATION E2.1. Adjusting the lubrication of the hook 1. Loosen the nut ② and adjust the amount of lubrication with the screw ①. Turn the screw clockwise to decrease or counterclockwise to increase the amount of oil.
  • Page 23: F Troubleshooting

    © ANITA F TROUBLESHOOTING Problem Cause Solution 1. Damage int the path of 1. Sand the surface with thread, damaged tip of the sandpaper. Sand the hook needle or the hook. with a file. 2. Upper thread tension is 2. Reduce the upper thread too high.
  • Page 24: G Drive Unit Manual

    © ANITA G DRIVE UNIT MANUAL G1. SAFETY INSTRUCTIONS 1) Read the manual carefully before installation and use. 2) Installation of the drive unit may only be carried out by a qualified person. 3) Follow all instructions indicated by symbols to avoid injury.
  • Page 25: G4. Installation

    © ANITA G4. INSTALLATION G4.1. Connector description Control box of the AS series MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...
  • Page 26: G4.2. Power Supply And Grounding

    © ANITA Connect the pedal and all connectors to the appropriate sockets as shown. ATTENTION: If you are unable to connect the connectors to the appropriate outlet, check the direction of the pins. Make sure you are plugging into the correct outlet.
  • Page 27: G5. Control Panel

    © ANITA G5. CONTROL PANEL G5.1. Control panel display The drive unit can be used with different models of sewing machines, which can have different optional functions as thread cutting, programmable back-tacking, automatic foot lift, etc. If your machine is not equipped with this option, some of the features described below will not be available for your model.
  • Page 28 © ANITA Display icons description Icon Description Icon Description Automatic Needle up stop trimming position Slow start Free sewing mode Start back tacking W sewing mode End back tacking Segment sewing Sewing segment Multi-segment index mode Numeric display Auto test...
  • Page 29: G5.2. Operation Panel Keys Description

    © ANITA G5.2. Operation panel keys description Button Name Description Function Use the button to select and confirm parameter (Parameters) settings and return to the sewing mode. Start back tacking Selects and turns on the initial back tacking. End back tacking Selects and turns on the end back tacking.
  • Page 30 © ANITA H-43. Press to enter the parameter. Stitch Press for half stitch compensation. Press and hold for compensation one stitch compensation. Hold for continuous compensational sewing. Trimming When the icon is lit, auto trimming function is on. Press again for turning the function off.
  • Page 31 Katalog náhradních dílů Spare Parts List GF-2230-4412 MH ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP04900_200204...
  • Page 32 MP04900_200204 04. 02. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP04900_200204...
  • Page 33 © ANITA Content A. Frame & Miscellaneous Cover (1/2) ..................4 A. Frame & Miscellaneous Cover (2/2) ..................6 B. Take-Up and Upper Shaft Components (1/2) ................ 8 B. Take-Up and Upper Shaft Components (2/2) ..............10 C. Needle Bar Rocking ......................12 D.
  • Page 34: Frame & Miscellaneous Cover (1/2)

    © ANITA A. FRAME & MISCELLANEOUS COVER (1/2) MP04900_200204 GF-2230-4412 MH...
  • Page 35 © ANITA A. FRAME & MISCELLANEOUS COVER (1/2) Ref. No Parts No. Name of parts Description Note 40016798 Face plate asm. SS4111215SP Screw 11/64-40 L=12 40019114 Lubrication supplement 21331301 Top cover B SS4110815SP Screw 11/64-40 L=8 21355904 Arm thread guide...
  • Page 36: Frame & Miscellaneous Cover (2/2)

    © ANITA A. FRAME & MISCELLANEOUS COVER (2/2) MP04900_200204 GF-2230-4412 MH...
  • Page 37 © ANITA A. FRAME & MISCELLANEOUS COVER (2/2) Ref. No Parts No. Name of parts Description Note 23208606 Sliding plate support 22602601 Bed screw stud 10201200A Rubber plug 22619100A EA9500B0100 Cable band SS6151210SP Screw 15/64-28 L=12 MP04900_200204 GF-2230-4412 MH...
  • Page 38: Take-Up And Upper Shaft Components (1/2)

    © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (1/2) MP04900_200204 GF-2230-4412 MH...
  • Page 39 © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (1/2) Ref. No Parts No. Name of parts Description Note 010259 Upper shaft 21333000 Upper shaft front metal B1905520000 Thread take-up lever B1906051000 Take-up lever pin B1907057000 Thrust pin SS8150822TP Screw 15/64-28 L=8...
  • Page 40: Take-Up And Upper Shaft Components (2/2)

    © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (2/2) MP04900_200204 GF-2230-4412 MH...
  • Page 41 © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (2/2) Ref. No Parts No. Name of parts Description Note 010153 Belt cover 010426 Screw SS8150710TP Screw 15/64-28 L=7 HX00123000A Cable clip B1312563000A Safety clutch push button RE0500000K0 E-ring B1639051000 Spring B1313055000...
  • Page 42: Needle Bar Rocking

    © ANITA C. NEEDLE BAR ROCKING MP04900_200204 GF-2230-4412 MH...
  • Page 43 © ANITA C. NEEDLE BAR ROCKING Ref. No Parts No. Name of parts Description Note 21362504 Needle bar frame 21405204 Hinge stud 22814909 Felt B1437051000 Oil wick retainer SS8151150TP Screw 15/64-28 L=10.5 22814909 Felt B1401518000 Needle bar B1411521000 Needle rod holder...
  • Page 44: Pressure Adjusting & Upper Feed Mechanism (1/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (1/3) MP04900_200204 GF-2230-4412 MH...
  • Page 45 © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (1/3) Ref. No Parts No. Name of parts Description Note 21340401 Upper feed shaft 21340500 Upper feed front arm SS8660612TP Screw 1/4-40 L=6 21341904 Front metal 21378302 Feed shaft metal 229044155 Main shaft thrust collar asm.
  • Page 46: Pressure Adjusting & Upper Feed Mechanism (2/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (2/3) MP04900_200204 GF-2230-4412 MH...
  • Page 47 © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (2/3) Ref. No Parts No. Name of parts Description Note 40033031 Presser bar holder A SS7110910TP Screw 11/64-40 L=8.5 21340906 Presser adjusting screw 22907604 Presser spring regulator nut B1502246000 Presser spring...
  • Page 48: Pressure Adjusting & Upper Feed Mechanism (3/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (3/3) MP04900_200204 GF-2230-4412 MH...
  • Page 49 © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (3/3) Ref. No Parts No. Name of parts Description Note 21339809 Upper feed dog spring hook SS7110830SP Screw 11/64-40 L=7.5 10713766A Eccentric rod (set) MP04900_200204 GF-2230-4412 MH...
  • Page 50: Feed Mechanism (1/2)

    © ANITA E. FEED MECHANISM (1/2) MP04900_200204 GF-2230-4412 MH...
  • Page 51 © ANITA E. FEED MECHANISM (1/2) Ref. No Parts No. Name of parts Description Note 21364252 Feed base asm. 21364203 Feed base 10107902 Feed bar fork SS9151440CP Screw 15/64-28 L=14 WP0621016SD Washer 6.2x13x1 SM8050502TP Screw M5 L=5 B1604012000A Feed bar shaft...
  • Page 52: Feed Mechanism (2/2)

    © ANITA E. FEED MECHANISM (2/2) MP04900_200204 GF-2230-4412 MH...
  • Page 53 © ANITA E. FEED MECHANISM (2/2) Ref. No Parts No. Name of parts Description Note SM6061802TP Screw M6 L=15 21336805 Feed dial A 21366901 Feed dog SS6121860SP Screw 3/16-28 L=18 11009909 Feed regulator screw R0092270200 Rubber ring 22912000 Feed regulator pin...
  • Page 54: Hook Shaft & Lower Feed Mechanism (1/2)

    © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (1/2) MP04900_200204 GF-2230-4412 MH...
  • Page 55 © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (1/2) Ref. No Parts No. Name of parts Description Note 21335104 Hook shaft base (right) 21362108 Hook shaft base (left) 21334909 Bobbin case opening lever link B1821051000 Crank screw stud CQ202000000 Oil wick 0.02 m...
  • Page 56: Hook Shaft & Lower Feed Mechanism (2/2)

    © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (2/2) MP04900_200204 GF-2230-4412 MH...
  • Page 57 © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (2/2) Ref. No Parts No. Name of parts Description Note SS8151150SP Screw 15/64-28 L=10.5 SQ1110401MZ Connecting screw 22611909 Oil pump shaft SS8660530TP Screw 1/4-40 L=4.5 22611701 Plunger bushing B 10109700 Thrust washer A...
  • Page 58: Thread Tension Components

    © ANITA G. THREAD TENSION COMPONENTS MP04900_200204 GF-2230-4412 MH...
  • Page 59 © ANITA G. THREAD TENSION COMPONENTS Ref. No Parts No. Name of parts Description Note 21390562 Thread tension asm. B3128051000 Thread take-up spring A 10124501 Thread take-up spring stud 21390554 Thread tension base complete 21441100 Thread release plate SD0470281SP Hinge screw D=4.7 H=2.8...
  • Page 60: Lower Thread Winder Mechanism Components

    © ANITA H. LOWER THREAD WINDER MECHANISM COMPONENTS MP04900_200204 GF-2230-4412 MH...
  • Page 61 © ANITA H. LOWER THREAD WINDER MECHANISM COMPONENT Ref. No Parts No. Name of parts Description Note 21357967 Bobbin device asm. 22537658 Bobbin fitting basis complete 21357959 Bobbin shaft complete 22538151 Bobbin cam shaft complete 23636202 Bobbin lever 21356001 Adjusting plate...
  • Page 62: Automatic Presser Lifting Mechanism

    © ANITA I. AUTOMATIC PRESSER LIFTING MECHANISM MP04900_200204 GF-2230-4412 MH...
  • Page 63 © ANITA I. AUTOMATIC PRESSER LIFTING MECHANISM Ref. No Parts No. Name of parts Description Note ACQ40x15 Air cylinder SM6082002TP Screw M8 L=20 21356506 Cylinder Connecting screw NM6080001SE SD0720331SP Hinge screw D=7.24 H=3.3 21356605 Lever A 21356803 Lever B SM6051002TP Screw M5x0.8 L=10...
  • Page 64: Lubrication Components (1/2)

    © ANITA J. LUBRICATION COMPONENTS (1/2) MP04900_200204 GF-2230-4412 MH...
  • Page 65: Lubrication Components (2/2)

    © ANITA J. LUBRICATION COMPONENTS (1/2) Ref. No Parts No. Name of parts Description Note 21345756 Arm once through oil felt asm. 21345707 Arm once through felt A 21345806 Felt B 21345905 Face once through felt 21346358 Felt support asm.
  • Page 66 © ANITA J. LUBRICATION COMPONENTS (2/2) MP04900_200204 GF-2230-4412 MH...
  • Page 67 © ANITA J. LUBRICATION COMPONENTS (2/2) Ref. No Parts No. Name of parts Description Note 021364 Cover 021363 Oil filter head 021360 Throttle sleeve B3534155000 Plunger B1214038000 Plunger spring B3524552000 Plunger thrust plate SS4110815SP Screw 11/64-40 L=8 SS6111010SP Screw 11/64-40 L=9.5...
  • Page 68: Thread Stand Components

    © ANITA K. THREAD STAND COMPONENTS MP04900_200204 GF-2230-4412 MH...
  • Page 69 © ANITA K. THREAD STAND COMPONENTS Ref. No Parts No. Name of parts Description Note 26910158 Thread standing device asm. MP04900_200204 GF-2230-4412 MH...
  • Page 70: Air Mechanism Components

    © ANITA L. AIR MECHANISM COMPONENTS MP04900_200204 GF-2230-4412 MH...
  • Page 71 © ANITA L. AIR MECHANISM COMPONENTS Ref. No Parts No. Name of parts Description Note 021724 Air apparatus (B) asm. 021723 Mounting panel 021703 Screw D=4.1 L=20 021704 Screw M6 L=10 021705 Filter regulator SPC8-01 Nipple SPL6-01 Nipple WP0621016SH Flat pad...

This manual is also suitable for:

Garudan gf-2230-4412 mh

Table of Contents