1. Manuals
  2. Brands
  3. Anita Manuals
  4. Sewing Machine
  5. Garudan GF-1105 Series
  6. User manual

Anita Garudan GF-1105 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User´s Manual
GF-1105 Series
ANITA B s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech Republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Garudan GF-1105 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Anita Garudan GF-1105 Series

Summary of Contents for Anita Garudan GF-1105 Series

  • Page 1 User´s Manual GF-1105 Series ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz...
  • Page 2 ANITA © All rights reserved All rights reserved property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2016) MP01100EN_161101...

  • Page 3: Table Of Contents

    ANITA © CONTENTS 1) SPECIFICATIONS ........................ 4 2) SAFETY RULES ........................5 3) INSTALLATION ........................7 3.1 Before operation ....................... 7 3.2. Machine head ........................7 4) LUBRICATION ........................8 4.1 Installing Magnetic Chip Remover .................. 8 4.2 Lubricating the oil pan ..................... 8 5) FUNCTION OF REVERSE FEED STITCHING MECHANISM ........

  • Page 4: Specifications

    ANITA © 1) SPECIFICATIONS Model Usage Max speed Max stitch Needle Foot lift length system/size manual/knee GF-1105-147 LM light-medium 5.000 spm 134R(65-110) 6/13mm Netto weight : GF-1105-147 LM 42kg (head) Measurement : GF-1105-147 LM 25x69x57cm (head) GENERAL DESCRIPTION AND USAGE: Single needle high-speed industrial sewing machine with lower drop feed.

  • Page 5: Safety Rules

    ANITA © 2) SAFETY RULES MP01100EN_161101...
  • Page 6 ANITA © MP01100EN_161101...

  • Page 7: Installation

    ANITA © 3) INSTALLATION 3.1 Before operation 3.2. Machine head Oil tray should be put at the four corners of the slot in the table plate. Fix two arm cushion 1 to the A side of oil tray 3. Fix the two stand bases 2 to the B side of oil tray 3, then fix the oil tray 3 (Fig.

  • Page 8: Lubrication

    ANITA © 4) LUBRICATION 4.1 Installing Magnetic Chip Remover Attach the magnetic chip remover, which is in the accessory box, to the drain plug of th eoil pan * Do not use the magnet for other purposes. Use of the sewing machine without the magnet may cause malfunction or even damage of the machine.

  • Page 9: Control And Adjustment Of The Sewing Machine

    ANITA © 6) CONTROL AND ADJUSTMENT OF THE SEWING MACHINE 6.1 Needle Insertion With the needle groove (1) facing left, insert the needle tip into the upper end of the stopper hole (2) and tighten the needle with the clamp screw (3). (Fig.7) Fig.7...

  • Page 10: Lubrication Adjustment Of Hook

    ANITA © 7) LUBRICATION ADJUSTMENT OF HOOK 7.1 Checking the oil supply level of Hook a) After running the sewing machine for three minutes, secure the oil flow checking paper as shown in Fig. 10 and run the machine for about five seconds. Then check the oil tape marked on the paper.

  • Page 11: Inserting The Lower Thread

    ANITA © 8) INSERTING THE LOWER THREAD 8.1 After placing a bobbin (2) in a bobbin case (6), push the thread through the thread groove (3) and hook it under the tension adjusting plate spring (4). To tighten the lower thread, turn the tension adjusting screw (5) clockwise.Turn it counterclockwise to loosen.

  • Page 12: Inserting The Upper Thread

    ANITA © 9) INSERTING THE UPPER THREAD Place the thread take-up lever at the highest position and route the upper thread in the order indicated in Fig.14. Fig. 14 MP01100EN_161101...

  • Page 13: Upper Thread Tension Adjustment

    ANITA © 10) UPPER THREAD TENSION ADJUSTMENT 10.1 Main thread adjustment device The tension of the upper thread gets tighter if the tension adjusting nut (1) as in Fig. 15 is turned in a clockwise direction and it gets looser when turned in the opposite direction.

  • Page 14: Adjustment Of Height And Pressure Of Presser Foot

    ANITA © 11) ADJUSTMENT OF HEIGHT AND PRESSURE OF PRESSER FOOT A. AS is Fig.18, remove the rubber plug (2) in the face plate and place the presser foot (3) on the needle plate. Then, loosen the presser bar fixing screw (4) and adjust the height of the presser bar.

  • Page 15: Hand Lifter

    ANITA © 13) HAND LIFTER 1. To stop the machine with its presser foot up, turn hand lifter 1 in direction „A“ 2. The presser foot will go up about 5.5mm and stop 3. The presser foot will go back to its original position when hand lifter is turned down in direction „B“...

  • Page 16: Feed Cam Adjustment

    ANITA © B. Inclination adjustment of the feed dog a) The standard tilt of the feed dog is obtained when marker dot (A) on the feed bar shaft is aligned with marker dot (B) on feed rocker (1). (Fig.23) Fig. 23 16) FEED CAM ADJUSTMENT 1.

  • Page 17: Timimg Adjustment Of Trimmer

    ANITA © 18) TIMIMG ADJUSTMENT OF TRIMMER Fig.26 A. Adjusting the position of the thread trimming cam If you run the handwheel of the machine, the needle bar goes from the bottom up to height of 5 mm, then the thread trimming solenoid (4) is pressed to impel the roller ball to enter the concave of the thread trimming cam (1).

  • Page 18: Replacement Of Fixed Knife

    ANITA © 20) REPLACEMENT OF FIXED KNIFE A. To change the fixed knife (1), loosen the inner spindle stopper fixing screw (2) as in Fig.28, remove the washer (3) and inner spindle stopper (4), then unfasten the fixed knife fixing screw (5).

  • Page 19: Adjustment Of Pedal

    ANITA © 22) ADJUSTMENT OF PEDAL 1. Installing the connecting rod Move the pedal (3) to the right or left as indicated by arrows. Speed regulator lever (1) of the motor and the rod (2) should be perpendicular to the pedal. See fig. 31 2.

  • Page 20: Pedal Pressure And Pedal Stroke

    ANITA © 24) PEDAL PRESSURE AND PEDAL STROKE 1. Adjusting the pressure required to depress the front part of the pedal. a) This pressure can be changed by altering mouthing position of pedaling pressure adjust spring (1). b) The pressure decreases when you hook the spring on the left side.

  • Page 21: Adjusting The Height Of The Knee Lifter

    ANITA © 26) ADJUSTING THE HEIGHT OF THE KNEE LIFTER 1. The standard height of the presser foot lifted using the knee lifter is 10mm. 2. You can adjust the presser foot lift up to 13mm using knee lifter adjust screw ①. (The max.
  • Page 22 ANITA © MP01100EN_161101...
  • Page 23 Operation Manual for driving unit GF-1105-147 ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz...
  • Page 24 ANITA © All rights reserved All rights reserved property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2016)
  • Page 25 ANITA © Content: 1) SAFETY INSTRUCTIONS ....................... 4 2) BUTTON DISPLAYS AND OPERATING INSTRUCTIONS ............6 2.1 Key Description ......................6 2.2 Comparison Table of LCD Display Fonts and Actual Fonts ........... 7 2.3 Manually adjust the positioning ................... 7 2.4 Restore faktory settings ....................

  • Page 26: Safety Instructions

    ANITA © 1) SAFETY INSTRUCTIONS 1. Users are required to read the operation manual completely and carefully before installation or operation. 2. All the instruction marked with sign must be observed or executed; otherwise, bodily injuries might occur. 3. The product should be installed and pre-operated by well trained persons.
  • Page 27 ANITA © Note: We make our best effort to test and manufacture the product for assuring the quality. However, it is possible that this product can be damaged due to external magnetic interference and electronic static or noise or unstable power source more than expected;...

  • Page 28: Button Displays And Operating Instructions

    ANITA © 2)BUTTON DISPLAYS AND OPERATING INSTRUCTIONS 2.1 Key Description Name Indicate Icons Execution starting back seam B segment or execution starting back seam (A,B segment) 1 Execution starting back seam (A,B segment) 2 times Start/End Back- Tacking Selection Execution terminates back seam C segment or execution...

  • Page 29: Comparison Table Of Lcd Display Fonts And Actual Fonts

    ANITA © Name Indicate Icons LED ON=Presser Foot automatically goes up after trimming. LED ON= Presser Foot automatically goes up after motor Presser foot stops. shortcuts 3. Two icons are both LED ON= Presser Foot automatically goes up after trimming and motor stops.

  • Page 30: Restore Faktory Settings

    ANITA © 2.4 Restore faktory settings Hold down the Double- click the [S] left two [-] key to key to confirm it, boot shutdown restart...

  • Page 31: User Parameter & Technician Parameter

    ANITA © 3) USER PARAMETER & TECHNICIAN PARAMETER Parameter Parameter Function Range Default Key Description In the normal screen, press [P] Maximum Sewing Speed Maximum speed of machine sewing 100-3700 3700 −/ + (s/m) Speed Curve Adjustment (%) The Lager the value, the faster to increase 1-100 −/ +...
  • Page 32 ANITA © Parameter Parameter Function Range Default Key Description Setting Stitches D of End invalid − /+ Back-Tacking Anti-pedaling pedals points; 0-1000 − /+ voltage Stitch Balance for End Back- 0 → 200 Action gradually lag − /+ Tacking 3...
  • Page 33 ANITA © Parameter Parameter Function Range Default Key Description For entering service parameter interface contact your sales agent Brake force Efforts to stop the machine when selecting 0-31 − /+ Back-seam operation duty Back-seam action to periodic power output 10-90 −...
  • Page 34 ANITA © Parameter Parameter Function Range Default Key Description For entering service parameter interface contact your sales agent Backstitch release buffer (ms) Slow release delay factor 0-500 − /+ The factory Type Selection − /+ Presser foot release buffer Efforts to ease foot pressure release time 0-500 −...

  • Page 35: Error Code List

    ANITA © 4) ERROR CODE LIST Error Code Problem Strategies Power Module is faulty. System will be shut down until the power resets on. Abnormal over current or voltage. Please acheck the power board in detail. Resistor is damaged or F1 fuse is blown.

  • Page 36: Port Outline Diagram

    ANITA © 5) PORT OUTLINE DIAGRAM 5.1 The Name of each port Presser foot Head 14 P Pedals ~ 220 V patch port function port plug port power line 5.2.14P Function Port Table 1) Trimming Solenoid 1, 8 2) Clamp, dial line solenoid: 2, 9...
  • Page 37 ANITA ©...
  • Page 39 Katalog náhradních dílů Spare Parts List GF-1105-147 LM ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz...
  • Page 40 Anita B s r.o. zakázáno. Copyright © Anita B s r.o. (2016) All rights reserved All rights reserved property of Anita B and protected by copyright. The use of this content without written permission is prohibited. Copyright © Anita B s r.o. (2016) MP01100EN_161101...
  • Page 41 ANITA © Content/Obsah 1. MACHINE FRAME&MISCELLANEOUS COVER COMPONENTS ....4 2. MAIN SHAFT&THREAD TAKE-UP COMPONENTS ........6 3. NEDDLE BAR & THREAD TENSION COMPONENTS ........8 4. PRESSER BAR & TENSION RELEASE COMPONENTS (1/2) ......10 4. PRESSER BAR & TENSION RELEASE COMPONENTS (2/2) ......12 5.

  • Page 42: Machine Frame&Miscellaneous Cover Components

    ANITA © 1. MACHINE FRAME&MISCELLANEOUS COVER COMPONENTS MP01100EN_161101...
  • Page 43 ANITA © 1. MACHINE FRAME&MISCELLANEOUS COVER COMPONENTS PART NO. DESCRIPTION NOTE 10008972 Screw 20018955 Side plate 10008977 Rubber plug 10052029 Side plate gasket 10004380 Screw 10047410 Bobbin thread tension ASM. 10008773 Rubber ring 10050423 Screw 10011149 Thread cutter A-10 10008939 O-ring...

  • Page 44: Main Shaft&Thread Take-Up Components

    ANITA © 2. MAIN SHAFT&THREAD TAKE-UP COMPONENTS MP01100EN_161101...
  • Page 45 ANITA © 2. MAIN SHAFT&THREAD TAKE-UP COMPONENTS PART NO. DESCRIPTION NOTE 10010543 Thread take-up crank shaft 10010083 Screw 10010535 Thread take-up bar 10038474 Thread take-up lever Asm. 10010539 Oil resistant cover 10010545 Screw 10010534 O-ring 10010082 Screw 10010065 Screw B-10...

  • Page 46: Neddle Bar & Thread Tension Components

    ANITA © 3. NEDDLE BAR & THREAD TENSION COMPONENTS MP01100EN_161101...
  • Page 47 ANITA © 3. NEDDLE BAR & THREAD TENSION COMPONENTS PART NO. DESCRIPTION NOTE 10010587 Rubber plug 10011063 Bearing support 10041608 Needle bar 10011063 Screw 10014117 Bearing support 10005943 Needle bar thread guide 10034917 Needle DB×1 14# 10034916 Needle DP×5 18#...

  • Page 48: Presser Bar & Tension Release Components (1/2)

    ANITA © 4. PRESSER BAR & TENSION RELEASE COMPONENTS (1/2) MP01100EN_161101...
  • Page 49 ANITA © 4. PRESSER BAR & TENSION RELEASE COMPONENTS (1/2) PART NO. DESCRIPTION NOTE 10008409 Screw ASM. 10011022 Screw 10011023 Nut 10004439 Presser guide bar 10004473 Spring 10039365 Presser guide bar bracket 10000325 Screw 10011457 Oil protector cover 10014118 Bearing support D-10 See p.

  • Page 50: Presser Bar & Tension Release Components (2/2)

    ANITA © 4. PRESSER BAR & TENSION RELEASE COMPONENTS (2/2) MP01100EN_161101...
  • Page 51 ANITA © 4. PRESSER BAR & TENSION RELEASE COMPONENTS (2/2) PART NO. DESCRIPTION NOTE D-40 10041762 Lifting lever connecting rod D-41 10000134 Screw D-42 10050685 Nut MP01100EN_161101...

  • Page 52: Hook Of Driving Shaft Components

    ANITA © 5. HOOK OF DRIVING SHAFT COMPONENTS MP01100EN_161101...
  • Page 53 ANITA © 5. HOOK OF DRIVING SHAFT COMPONENTS PART NO. DESCRIPTION NOTE 10031259* Positioning finger 10011101 Screw 10006924 Bobbin case 10025484 Bobbin 10038530 Hook 10010064 Screw 10010063 Oil wick 10040274 Bearing support 10026781 Bearing support E-10 10008857 Bearing support E-11...

  • Page 54: Feed Mechanism Components (1/2)

    ANITA © 6. FEED MECHANISM COMPONENTS (1/2) MP01100EN_161101...
  • Page 55 ANITA © 6. FEED MECHANISM COMPONENTS (1/2) PART NO. DESCRIPTION NOTE 10010089 Snap ring 10010084 Connecting rod 10010115 Feed drive eccentric cam 10010072 Connecting rod 10010098 Thrust cover 10010643 Screw 10010238 Screw 10013772 Bearing support 10026886 Pin F-10 10051742 Screw...

  • Page 56: Feed Mechanism Components (2/2)

    ANITA © 6. FEED MECHANISM COMPONENTS (2/2) MP01100EN_161101...
  • Page 57 ANITA © 6. FEED MECHANISM COMPONENTS (2/2) PART NO. DESCRIPTION NOTE F-38 10009008 Screw F-39 10039853 Reverse feed shaft F-40 10010287 Pin F-41 10051845 Screw F-42 10051770 Feed dial F-43 10051578 F-44 10051619 Pin F-45 10013869 Spring F-46 10008829 Screw...

  • Page 58: Feed Regulating Components

    ANITA © 7. FEED REGULATING COMPONENTS MP01100EN_161101...
  • Page 59 ANITA © 7. FEED REGULATING COMPONENTS PART NO. DESCRIPTION NOTE 10008934 Screw 10011168 Washer 10043253 Led lamp ASM. 10012505 Screw 10003281 Snap ring 10024748 Snap ring 10012985 Nut 10012983 Screw 10012797 Reverse feed connecting plate G-10 10012989 Connecting arm ASM.

  • Page 60: Thread Trimmer Components (1/2)

    ANITA © 8. THREAD TRIMMER COMPONENTS (1/2) MP01100EN_161101...
  • Page 61 ANITA © 8. THREAD TRIMMER COMPONENTS (1/2) PART NO. DESCRIPTION NOTE 10008866 Trimming crank shaft 10011630 Short bushing 10011630 Short bushing 10011649 Spring 10008865 Washer 10011588 Screw 10011579 Trimming crank 10011579 Block 10008863 Screw H-10 10011494 Round knife H-11 10004640 Round knife bracket...

  • Page 62: Thread Trimmer Components (2/2)

    ANITA © 8. THREAD TRIMMER COMPONENTS (2/2) MP01100EN_161101...
  • Page 63 ANITA © 8. THREAD TRIMMER COMPONENTS (2/2) PART NO. DESCRIPTION NOTE H-38 10031415 Thread trimmer solenoid H-39 10011606 Washer H-40 10011845 Washer H-41 10028999 Screw H-42 10012467 Screw H-43 10003077 Washer H-44 10011605 Screw H-45 10011584 Dispart H-46 10013154 Washer...

  • Page 64: Lubrication Components

    ANITA © 9. LUBRICATION COMPONENTS MP01100EN_161101...
  • Page 65 ANITA © 9. LUBRICATION COMPONENTS PART NO. DESCRIPTION NOTE 10014197 Foam rubber 10010294 Oil felt preser 10008934 Screw 10007795 Tube 10042077 Oil felt preser 10004065 Oil stoper 10005558 Screw 10050666 Main shaft oil tube 10010340 Oil tube holder I-10 10010066 Screw...

  • Page 66: Presser Foot Components Of Oil Plate Knee Lift

    ANITA © 10. PRESSER FOOT COMPONENTS OF OIL PLATE KNEE LIFT MP01100EN_161101...
  • Page 67 ANITA © 10. PRESSER FOOT COMPONENTS OF OIL PLATE KNEE LIFT PART NO. DESCRIPTION NOTE 10008313 Oil reservoir 10014194 Oil reservoir gasket 10009984 Pin 10009991 Screw 10009988 Rubber ring 10002562 Bracket ASM. 10003896 Bracket 10002610 Screw 10002613 Screw J-10 10003899 Knee pressing shaft...

  • Page 68: Components Of Thread -Running Stand

    ANITA © 11. COMPONENTS OF THREAD -RUNNING STAND MP01100EN_161101...
  • Page 69 ANITA © 11. COMPONENTS OF THREAD -RUNNING STAND PART NO. DESCRIPTION NOTE 10004282 Column cap 10004293 Column pipe (upper) 10002953 Nut 10003022 Washer 10003301 Screw 10004285 Thread guide bushing 10004289 Thread guide pipe 10004298 Thread hanger (upper) 10004286 Column pipe connector...

  • Page 70: Accessories

    ANITA © 12. ACCESSORIES MP01100EN_161101...
  • Page 71 ANITA © 12. ACCESSORIES PART NO. DESCRIPTION NOTE 10010995 Screw driver 10034917 Needle 10003892 Oil reservoir magnet 10025484 Screw 10004455 Oil bottle with oil 10009986 Oil reservoir seat 10009993 Oil reservoir cushion 10004466 Head connecting hook 10003889 Nail L-11 10011041 Head connecting hook socket...

  • Page 72: Driwing Scheme For Table-Top Cn A92

    ANITA © 13. DRIWING SCHEME FOR TABLE-TOP CN A92 MP01100EN_161101...
  • Page 73 ANITA © Šicí sada Strana Spodní ponorné podávání SGF0002 Sewing set Page Lower drop feed Šicí sada s 4-řádkovým podavačem. Standardní výbava od 01.02.2015. Sewing set wit 4-rows feed dog. Standard set from 01.02.2015. Síla jehly: 134 Nm. 80-110 Needle size: Délka stehu:...
  • Page 74 ANITA © Šicí sada Strana Spodní ponorné podávání SGF0003 Sewing set Page Lower drop feed Šicí sada s 3-řádkovým podavačem. Sewing set wit 3-rows feed dog. Síla jehly: 134 Nm. 90-110 Needle size: Délka stehu: Max. 5 mm Stitch length: Použití:...
  • Page 75 ANITA © Šicí sada SGF0004 Strana Spodní ponorné podávání Sewing set Page Lower drop feed Šicí sada s 4-řádkovým pogumovaným podavačem. Sewing set wit 4-rows rubber feed dog. Síla jehly: 134 Nm. 65-80 Needle size: Délka stehu: Max. 4 mm Stitch length: Použití:...
  • Page 76 ANITA © Šicí sada Strana Spodní ponorné podávání SGF0007 Sewing set Page Lower drop feed Šicí sada s kolečkovou patkou. Sewing set with roller presser foot. Síla jehly: 134 Nm. 80-110 Needle size: Délka stehu: Max. 5 mm Stitch length: Použití:...
  • Page 77 ANITA © MP01100EN_161101...

This manual is also suitable for:

Garudan gf-1105-147 lm

Table of Contents