Quectel BG96 TCP/IP Application Note page 30

_data_format>,<recv_data_form
at>]
Write Command
Query/set the output format of
received data (only for
access mode and direct push
mode)
AT+QICFG="viewmode"[,<view_
mode>]
Write Command
Query/set the URC format of
TCP/IP buffer access mode. If this
command is set, when the module
receives data from a remote server,
the data length will be added to the
URC.
AT+QICFG="recvind",[<recv_ind
>]
Write Command
When module accesses to IPv4
address of a TCP/UDP server
under IPv6 network, the module will
translate IPv4 address
IPv4-embedded IPv6
using the network-specific prefixes
or the well-known prefix.
AT+QICFG="prefix",[<IPv6_prefi
x>,<prefix_length>]
Write Command
Query/set the maximum interval
BG96_TCP/IP_Application_Note
If the optional parameters are specified, set the format for the data
to be sent and received:
OK
If there is any error:
ERROR
Response
If the optional parameter is omitted, query the current setting:
buffer +QICFG: "viewmode",<view_mode>
OK
If the optional parameter is specified, set the output format of
received data:
OK
If there is any error:
ERROR
Response
If the optional parameter is omitted, query the current setting:
+QICFG: "recvind",<recv_ind>
OK
If the optional parameter is specified, set the URC format of
TCP/IP buffer mode:
OK
If there is any error:
ERROR
Response
If the optional parameters are omitted, query the current setting:
+QICFG: "prefix",<IPv6_prefix>,<prefix_length>
to OK
address
If the optional parameters are specified, set the network-specific
prefixes or the well-known prefix:
OK
If there is any error:
ERROR
Response
If the optional parameters are omitted, query the current setting:
LPWA Module Series
BG96 TCP/IP Application Note
29 / 52