Edirol LVS-400 Supplementary Manual page 6

About the New Functions
Switching the Image from A-BUS to B-BUS with the
Video Fader
You can use the video fader to switch the bus used for the image output. The selected
input image on the bus to which side the video fader is tilted becomes the output
image.
1
Press TRANSISION [MIX] or [WIPE].
Select the image transition pattern (effect).
Button Pattern
[MIX] The transition uses a mix effect.
[WIPE] The transition uses a wipe effect.
2
Tilt the video fader towards the A-BUS side.
The video switches to the selected image.
3
Select the image source you want to output as the A-BUS image with one of the
A-BUS buttons 1–4.
The image corresponding to the lit (selected) A-BUS button is output from the
OUTPUT connector.
4
Select the image source you want to output as the B-BUS image with one of the
B-BUS buttons 1–4.
5
Tilt the video fader towards the B-BUS side.
The output image switches from A-BUS to B-BUS using the effect selected with
TRANSITION.
A-BUS
B-BUS
A
MIX
A
WIPE
6
A-BUS A-BUS
B-BUS B-BUS
B
B
Pressing the A-BUS or B-BUS
buttons while the video fader
is positioned midway between
A-BUS and B-BUS may disrupt
the image.