Edirol LVS-400 Supplementary Manual page 11

Relationship Between the Key and Incorporated
Images Using the Key Composite Functions
The relationship between the background image and the image used in
replacing the specified color in the background image is determined by the
position of the video fader.
1. Tilt the video fader toward the bus with the image you want to use as the
background.
The image corresponding to the lit (selected) BUS button is output from the
OUTPUT connector.
Background (Main) image
Key (Insert) image
2. Press [EFFECTS].
Tilt the video fader to the side containing the image you want to have
incorporated (with the BUS button lit); the image from the opposite side
becomes the key image (with the BUS button flashing).
3. Turn the MODE dial to select the key (the color to be replaced).
4. Tilt the video fader towards the key image side.
The composite output video contains the image corresponding to the flashing
BUS button and the image corresponding to the lit BUS button.
Lit
Flash
A-BUS
B-BUS
Output
Background (Main) image
Key (Insert) image
A-BUS
B-BUS
Output
About the New Functions
When [EFFECTS] is already lit
prior to Step 2, press [MIX] or
[WIPE] so that [EFFECTS] light
goes off. This is because the
background and key images
are determined the instant
[EFFECTS] is pressed and its
light goes on.
11