2
First pass the panel sheet opening (the portion that shows "A/B MODE") over
the video fader, starting from the right side of the fader.
3
Lay down the rest of the panel sheet over the other knobs and buttons so that
the respective knobs and buttons pass through the openings in the sheet.
Preparation for Use of the LVS-400
Before using the LVS-400, read the section "Connecting Peripheral Devices" in the
LVS-400 Owner's Manual.
Using the LVS-400 in A/B Mode
Use the following procedures in using the LVS-400 Version 2.0 in A/B mode.
1
Power up your LVS-400 while holding down [OUTPUT] and press [POWER].
S
MODE
The opening screen appears in the monitor display connected to MONITOR OUT.
Preparations for Use of the New Function (A/B Mode)
A / B MODE
EFFECTS
LEVEL
A-BUS
3