Edirol LVS-400 Supplementary Manual page 12

About the New Functions
Changing the Chroma-Key (Key Composite) Color
Using the Chroma-Key function, you can change the color that is replaced in the image.
1
Connect a monitor display to the MONITOR OUT connector.
2
Perform steps 1–2 of "Changing the Chroma-Key (Key Composite) Color" (p.
12).
Prepare to use Chroma Key, selecting the background and key images.
3
Turn the MODE knob to "CHR."
The LVS-400 switches to Chroma-Key mode.
4
In Normal mode, hold down either [MIX], [WIPE 1], or [WIPE 2] for at least three
seconds. In A/B mode, hold down [EFFECTS] for at least three seconds.
"KeyColor = ***" ("***" indicates the color type) appears in the monitor display
connected to the MONITOR OUT connector.
5
While continuing to hold down the button when you choose in step 4, turn the
TRANSITION TIME knob.
Select the color to be used as the key color. The monitor display then changes to
"KeyColor = ***."
B-BUS
The following shows the colors you can select as key colors.
KeyColor
01 Blue-Magenta
02 Blue-Cyan
(original factory condition)
03 Red-Magenta
04 Red-Yellow
05 Magenta-Red
06 Magenta-Blue
12
MODE LEVEL
TRANSITION TRANSITION TIME
5
MIX WIPE EFFECTS
5
KeyColor
07 Cyan-Green
08 Green-Cyan
09 Green-Red
10 Cyan-blue
11 Yellow-Green
12 Yellow-Red
B-BUS
Changes in the Key Color
setting are saved even when
the power is turned off.