Edirol V-44SW E1 Owner's Manual
  1. Manuals
  2. Brands
  3. Edirol Manuals
  4. Switch
  5. V-44SW E1
  6. Owner's manual

Edirol V-44SW E1 Owner's Manual

Edirol multi format video switcher instructions v-44sw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
Before using this unit, carefully read the sections entitled: "IMPORTANT SAFETY
INSTRUCTIONS" (p. 2), "USING THE UNIT SAFELY" (p. 6–7), and "IMPORTANT
NOTES" (p. 8). These sections provide important information concerning the
proper operation of the unit. Additionally, in order to feel assured that you have
gained a good grasp of every feature provided by your new unit, Owner's Manual
should be read in its entirety. The manual should be saved and kept on hand as a
convenient reference.
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V-44SW E1 and is the answer not in the manual?

Questions and answers

Related Manuals for Edirol V-44SW E1

Summary of Contents for Edirol V-44SW E1

  • Page 1 Owner’s Manual Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 6–7), and “IMPORTANT NOTES” (p. 8). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

  • Page 3: Table Of Contents

    Table of Contents Introduction Main Features ... 4 USING THE UNIT SAFELY ... 6 IMPORTANT NOTES... 8 Overview of the V-44SW ... 9 Organization of the V-44SW ... 9 About the Operating Modes ... 9 Panel Descriptions ...10 Front Panel... 10 Top Panel...

  • Page 4: Introduction

    The V-44SW offers two different modes for switching video, a “Direct mode” and a “Preset mode.” ● In Direct mode you can switch video with the press of a single button. ● In Preset mode, you can confirm the input video with the preview monitor before switching the video.
  • Page 5 Link Operation with Edirol V-440HDs, Control Remotely from External Devices ● Multi-screen presentations Using simple settings, you can synchronize operation of multiple V-44SWs with an Edirol V-440HD as the master device to have a single video source displayed across multiple display screens.

  • Page 6: Using The Unit Safely

    ● Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest EDIROL/ Roland Service Center, or an authorized EDIROL/ Roland distributor, as listed on the “Information”...
  • Page 7 Excessive loads can cause the insulation on the cord to heat up and eventually melt through. ● Before using the unit in a foreign country, consult with your retailer, the nearest EDIROL/Roland Service Center, or an authorized EDIROL/Roland distributor, as listed on the “Information” page.

  • Page 8: Important Notes

    ● Although the LEDs are switched off when the POWER switch is switched off, this does not mean that the unit has been completely disconnected from the source of power. If you need to turn off the power completely, first turn off the POWER switch, then unplug the power cord from the power outlet.

  • Page 9: Overview Of The V-44Sw

    In addition to the V-44SW’s normal mode of operation, there is another mode referred to as “V-440HD Slave mode.” V-440HD Slave mode is used only when operation of the V-44SW is linked to an Edirol V-440HD. When switched to V-440HD Slave mode, the V-44SW then functions as slave device to the V-440HD. You cannot use the V-44SW’s panel controls to switch video while the unit is in V-440HD Slave mode.

  • Page 10: Panel Descriptions

    Panel Descriptions Front Panel [MIDI] Button ● This switches reception of MIDI signals on and off. When switched off, the [MIDI] button is unlit, and the V- 44SW does not receive MIDI signals. ☞ “Temporarily Cutting Linked Operation” (p. 46) ●...

  • Page 11: Top Panel

    There are two ways to switch input video. ☞ “Switching Video” (p. 36) ● SD VIDEO [1]–[4] Buttons These switch the video being input to the S-VIDEO IN connectors and COMPOSITE IN connectors. ● HD/RGB [1]–[4] Buttons These switch the video being input to the HD/RGB IN connectors HD/RGB 1–4 Indicators...

  • Page 12: Rear Panel

    Panel Descriptions Rear Panel AC Inlet Connect the supplied power cord here. Security Slot ( ) You can attach a commercially available security lock here. http://www.kensington.com/ HD/RGB OUT ● HD/RGB OUT PGM Connectors 1, 2 These output the final output video as analog component signals or RGB signals.

  • Page 13: Setup And Settings Guide

    The V-44SW includes the following items. Please take a moment to confirm that all of these items have been included with the V-44SW. If you find that any item is missing, contact the nearest authorized EDIROL/Roland distributor in your country.

  • Page 14: Device Connections

    Setup and Settings Guide Device Connections ● Whenever connecting the V-44SW to other devices, always turn off the power to all devices to prevent malfunction and/ or damage to video monitors and other equipment. ● Be sure to use cables and adapter plugs with the proper connectors matching those of the other devices you are using. ●...
  • Page 15 (see figure) with an external ground. When the unit is grounded, a slight hum may occur, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest EDIROL/Roland Service Center, or an authorized EDIROL/Roland distributor, as listed on the “Information” page. Unsuitable places for connection •...

  • Page 16: Turn On The Power And Output The Video

    Press the [POWER] switch at the right of the V-44SW’s front panel to switch it to the ON position and turn on the power. (☞ p. 26). Press one of the OUTPUT FORMAT buttons [1080i], [720p], or [RGB] to select the output video format.

  • Page 17: Adjusting The Video Image Quality

    5. Turning Off the Power and Quitting Turn off the power to the connected devices. Press the [POWER] switch at the right of the V-44SW’s front panel to switch it to the OFF position and turn off the power. (☞ p. 26).

  • Page 18: Examples For Connecting And Setting The V-44Sw

    Setup and Settings Guide Examples for Connecting and Setting the V-44SW Outputting to a Plasma Display <HD Size (16:9) Output> Use the V-44SW’s component output for shows and other situations where the video is being output to plasma displays or high definition projectors RGB Video Output Device PC or Other Device...
  • Page 19 Select the format appropriate for the output device you are using. Setting Set the input to “RGB Input.” Switch off if the screen features a 16:9 wide output function. Setup and Settings Guide SD Video Output Device DV Camera, Player,...
  • Page 20 Setup and Settings Guide Outputting to an LED Display <SD Size (4:3) Output> In shows and other situations where SD video is being output to LED displays or similar displays, you can output video from the V-44SW’s HD/RGB OUT PGM connectors. RGB Video Output Device PC or Other Device Final Output (SD)
  • Page 21 Recording Hi-Vision Video to an HD Video Deck <HD-SDI Recording> When recording the V-44SW’s video output with an HD CAM deck, DVC PRO HD deck, HD non-linear editing device, or other such equipment, it may be necessary to convert the V-44SW’s component output to HD-SDI signals. For this, you will need to obtain a separate HD HD-SDI converter to convert the component signals to HD-SDI.

  • Page 22: Quick Guide

    Turn on the power to the connected devices (with video devices, play back the video). Press the [POWER] switch at the right of the V-44SW’s front panel to switch it to the ON position and turn on the power. (☞ p. 26).

  • Page 23: Try Adding Some Screen Transition Effects

    Try Adding Some Screen Transition Effects The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut and mix effects. Now try changing the screen transition effects to switch the video in various different ways. ☞...
  • Page 24 Quick Guide...

  • Page 25: Operation Guide

    Operation Guide...

  • Page 26: Basic Operation

    Confirm that all other devices are properly connected. witch the [POWER] switch at the right of the V-44SW’s front panel to ON. ■ Turning the Power Off ●...

  • Page 27: Working With The Menus

    ■ Working with the Menus Displaying Menus and Selecting Parameters Press the [MENU] button to display the Main menu. Use the [CURSOR/VALUE] knob to select a parameter. Rotating the [CURSOR/VALUE] knob moves the cursor vertically on the screen. The parameter where the cursor is located flashes, indicating that this parameter is selected.

  • Page 28: Fading Out The Final Output

    Basic Operation Fading Out the Final Output You can fade out the final output. This convenient function allows you to output black (or white) video when useful, such as during pauses for standby and at the ends of presentations. Set the fade time with the [TIME] knob. You can set the fade time to any value from 0.0 to 4.0 seconds.

  • Page 29: Restoring The Original Factory Default Settings (Factory Reset)

    Restoring the Original Factory Default Settings (Factory Reset) You can return the content of the settings to their original status at the time the V-44SW shipped from the factory. Try running Factory Reset when the V-44SW functions differently than described in the Owner’s Manual, even though you’ve carried out the procedures according to the instructions.

  • Page 30: Setting The Input And Output

    Setting the Input and Output The V-44SW handles input and output video in differing video formats, thus requiring adjustment of the image quality and field of view for each format. Appropriate settings need to be made for the input and output, to accommodate both the device that will be supplying the input to the V-44SW and the device to which the V-44SW will be outputting video.

  • Page 31: Setting The Output

    Press the [MENU] button to display the Main menu. Select “1. Output” and select “4: Output Format Sw Lock” from the sub-menu. 3 Set the parameter to “On.” Afterwards, the V-44SW will be unable to switch the output format even when the OUTPUT FORMAT buttons are pressed. ■...

  • Page 32: Setting The Hd/Rgb Input

    Setting the Input and Output Setting the HD/RGB Input With HD/RGB video, since the field of view and color may vary according to the format and device, be sure to make these settings for each input Press the [MENU] button to display the Main menu. Select “3.
  • Page 33 About the Scaling Type You can scale (enlarge or reduce) input video with a different aspect ratio (the ratio of the screen’s vertical and horizontal dimensions) to match that of the output format (p. 30) to have the video appear in the proper aspect ratio. Values Explanation Full Scale...

  • Page 34: Setting The Sd Input

    Setting the Input and Output Setting the SD Input With SD video, there can be individual differences depending on the type of device, so settings for the input should be made individually. SD signals are input to the “SD section” then pass through the “HD/RGB section”...

  • Page 35: Displaying A Test Pattern

    Selecting NTSC or PAL Format The V-44SW’s input and output formats are selectable; you can specify the NTSC format used in Japan and the United States or the PAL format used in Europe. Switch to the format suited to your needs. ●...

  • Page 36: Switching Video

    Switching Video Selecting the Video Switching Mode The V-44SW features two different video switching modes, “Direct mode” and “Preset mode.” Each mode functions in switching video as follows. Direct Mode The final output video is switched when channels are selected with the press of a single button.

  • Page 37: Switching In Preset Mode

    The channel select button for the video output as the final output video remains lit. Stops flashing and remains lit. Repeat Steps 1 and 2 to switch the video images. Switching Video To Prevent Errors in Using the Channel Select...

  • Page 38: Selecting The Effects To Be Applied In Switching

    Switching Video Selecting the Effects To Be Applied in Switching The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut and mix effects. Press a TRANSITION selection button to select the screen transition effect.

  • Page 39: Adding Effects To The Video

    [TAKE] button is pressed. The [TAKE] button lights while the sub- screen is displayed. ● While the sub-screen is being displayed, you can switch the sub- screens just by pressing the channel select buttons. ● When Key Composite (p. 41) is in use, the key composite effect is applied to the video in the sub-screen.

  • Page 40: Advanced P In P Effect Settings

    If you do not want the final output video to switch, first press the [TAKE] button to hide the sub-screen, then switch off the P in P effect.

  • Page 41: Applying The Key Composite Effect

    If you do not want to switch the final output video, first press the [TAKE] button to hide the key composite video, then switch off the Key Composite effect.

  • Page 42: Registering Often-Used Settings (Panel Presets)

    Registering Often-Used Settings (Panel Presets) You can register button settings, settings for the Picture in Picture (P in P) and other special effects, and other settings as presets. You can register up to fifteen presets. You can call up registered presets instantly just by pressing the PANEL PRESET buttons.

  • Page 43: Copying Presets

    Fading Out the Output When Calling Up Presets You can call up presets after you have started to fade out the output. Press the [MENU] button to display the Main menu. Select “7. Panel Preset Edit” and select “4: Set Preset Fade Time”...

  • Page 44: Using The V-44Sw With Other Devices

    Using the V-44SW with a V-440HD for Multi-Screen Output You can link V-44SWs with an Edirol V-440HD in a system of up to six devices to display a single video source across multiple screens. This function is referred to as “Multi-Screen Output.”...

  • Page 45: Using Midi

    Using MIDI The V-44SW can be controlled from an external device using MIDI. You can, for example, control the V-44SW from a Roland MIDI-compatible product (e.g., a Fantom-X Series keyboard) to conduct video performances synchronized with sounds. ■ About MIDI What is MIDI? MIDI, an abbreviation for Musical Instrument Digital Interface, is an international standard created to enable exchange of...

  • Page 46: Controlling The V-44Sw From An External Device Via Midi

    You can use MIDI to link operation of multiple V-44SWs. ● If Linking Operation of Multiple V-44SWs Select “9. MIDI Setup” from the menu and set “4: MIDI Out/Thru Switch” as follows. Master V-44SW: V-44SWs other than the master: ●...

  • Page 47: Controlling The V-44Sw From A Pr-80/50

    ■ Controlling the V-44SW from a PR-80/50 You can control the V-44SW remotely from an Edirol PR-80 or PR-50 (hereafter referred to as PR Series devices) via MIDI. The following operations can be controlled from the PR Series device. ●...

  • Page 48: Controlling The V-44Sw From An External Device Using The Remote Connector

    V-LINK compatible instrument (such as the Fantom-X). ● For more on how to switch V-LINK mode on and off, refer to the Owner’s Manual of the V-LINK compatible device connected to the V-44SW.

  • Page 49: Backing Up The V-44Sw's Settings To A Computer

    Backing Up the V-44SW’s Settings to a Computer You can back up and restore the V-44SW’s settings by transmitting data between the V-44SW and a computer. ● This function requires software supporting backup and restore procedures. ● With the V-44SW, use the “Serial Data Tool” software used in backing up the V-440HD’s settings (for Windows XP only).
  • Page 50 Using the V-44SW with Other Devices...

  • Page 51: Appendices

    Appendices...

  • Page 52: Troubleshooting

    Troubleshooting If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby EDIROL/Roland Service Center or an authorized EDIROL/Roland distributor. Video Output Video not being output ● Devices are connected incorrectly Properly reconnect the devices.
  • Page 53 If something does get inside the exhaust vent and you are unable to remove it from the outside, contact the nearest EDIROL/Roland Service Center, listed on the back page of the warranty card. Troubleshooting...

  • Page 54: Menu List

    Menu List Main menu This is the Main menu list displayed when the [MENU] button is pressed. Parameters Explanation 1. Output Settings for the final output are made here. 2. SD Input SD input settings are made here. 3. HD/RGB Input HD/RGB input settings are made here.
  • Page 55 2. SD Input SD input settings are made here. Parameters Explanation 1: SD Ch1 Sets video input to Channel 1 of the SD IN connectors 2: SD Ch2 Sets video input to Channel 2 of the SD IN connectors 3: SD Ch3 Sets video input to Channel 3 of the SD IN connectors 4: SD Ch4 Sets video input to Channel 4 of the SD IN connectors...
  • Page 56 Menu List *1 Cannot be set in HD/RGB SD. Parameter numbers are in sequence, with these parameters omitted. *2 Enabled when Format Auto Detect is set to Manual. *3 Enabled when Pre Scaling Mode is set to Manual. The “Manual Pre Scaling” setting has no effect in the P in P effect (p. 39) sub-screen. *4 Enabled when Scaling Type is set to Manual.
  • Page 57 6. Wipe Select Wipe effect settings are made here. Parameters Explanation 1: Wipe Sw1 Sets WIPE [1] button 2: Wipe Sw2 Sets WIPE [2] button 3: Wipe Sw3 Sets WIPE [3] button 4: Wipe Sw4 Sets WIPE [4] button Wipe Sw Sub Menu Parameters Explanation 1: Wipe Pattern...
  • Page 58 [MIDI] button function 2: MIDI Tx Channel Sets MIDI Transmit channel 3: MIDI Rx Channel Sets MIDI Receive channel 4: MIDI Out/Thru Switch MIDI OUT/THRU connector function 5: V-LINK Switch Switches the V-LINK Slave function on and off 6: Device ID...

  • Page 59: Midi Implementation Chart

    MIDI Implementation Chart MULTI-FORMAT VIDEO SWITCHER MIDI Implementation Chart Model V-44SW Function... Basic Default Channel Changed 1–16 Default Mode 3 Mode Messages Altered ************** Note Number : True Voice Note On Velocity Note Off After Key's Touch Channel's Pitch Bend 0, 32 1–5 7–31...

  • Page 60: Remote Command Reference

    * When “Panel Operation Mode” is set to “Direct Mode,” the inputs switch as the different input channels are selected. * * When “Panel Operation Mode” is set to “Preset Mode,” following selection of the input channel, the inputs are then switched when the [TAKE] button is pressed to select the input.
  • Page 61 OUT OUTPUT FORMAT Button Select stxOUT:a; a: 0–2 (0: 1080i, 1: 720p, 2: RGB) This selects the OUTPUT FORMAT button, changing the format of the video output. ACK is returned by the V-44SW upon proper reception of the command. FAD OUTPUT FADE Operation stxFAD:a;...

  • Page 62: Connector Specifications

    Connector Specifications HD/RGB IN OUT Connectors ■ Inputting and Outputting Analog Component Signals • Connector Type: D-sub 15-pin shrink terminal (female) Pin number Signal name Pin Connections Pr-GND Y-GND Pb-GND N.C. (Reserved) Frame GND ■ Inputting and Outputting RGB Signals •...

  • Page 63: About Connection Cables Used With The Component Inputs And Outputs

    About Connection Cables Used with the Component Inputs and Outputs You can use a D-sub to 5-BNC cable to connect the component inputs and outputs. Check the D-sub to 5-BNC wiring diagram, then correctly connect the (three) BNC connectors. * Be sure to use cables and adapter plugs with the proper connectors matching those of the other devices you are using. V-44SW HD/RGB IN/OUT Connector D-sub15-pin (female)

  • Page 64: Menu Settings Memo

    9: Border Edge 10: Crop 5. Key 1: Key Type 2: Key Level 3: Key Soft Edge 6. Wipe Select (Wipe Switch) 1: Wipe Pattern 2: Wipe Reverse 3: Wipe Edge Type 7. Panel Preset Edit 1: Copy 2: Exchange...
  • Page 65 8: Take Switch Assign 9: Transition Assign 10: Transition Time 11: Video Fader Assign 12: Key Switch Assign 13: P in P Switch Assign 14: Panel Preset Sw Assign 15: Output Format Sw Assign 16: Fade Switch Assign 17: Fade Level Assign...

  • Page 66: Panel Preset Memo

    Panel Preset Memo Buttons Picture in Picture Composite Other...

  • Page 67: Block Diagram

    Block Diagram...

  • Page 68: Main Specifications

    Main Specifications V-44SW: MULTI-FORMAT VIDEO SWITCHER Video Processing Video Format: Video Sampling Rate: Effects Video Transition Composition FX Functions Multi-Screen Presentation Screen Setup Synchronization Multiple Units by MIDI Master Fade 0 to 4 seconds, Black or White Connectors SD Input S-Video (Y/C) Preferential x 4 Video (composite) x 4 HD/RGB Input...

  • Page 69: Index

    Index Numerics 16:9 Output ... 18 4:3 Output ... 20 Aspect ratio ... 33 Automatically setting (RGB input) ... 32 Background screen ... 39, 41 Backing up ... 49 Bulk dump ... 47 Channels ... 9 Color bars ... 35 Crop ...
  • Page 70 Index Scaling ... 33 Scaling type ... 33 SD input ... 34 SD size (4:3) output ... 20 Serial Data Tool ... 49 Slave Mode ... 44 Soft edge ... 38 Sub-screen ... 39 Switching mode ... 36 Sync-on-green ... 15 Test pattern ...

  • Page 71: Federal Communications Commission Radio Frequency Interference Statement

    This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 72: North America

    Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. CENTRAL/LATIN ASIA AMERICA CHINA Roland Shanghai Electronics Co.,Ltd. Roland Systems Group U.S. 5F. No.1500 Pingliang Road 425 Sequoia Drive Suite 114,...

This manual is also suitable for:

V-44sw

Table of Contents

Save PDF