Installing The Motherboard - Supermicro X11DPT-B User Manual

Super X11DPT-B User's Manual

2.2 Installing the Motherboard

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips
Screwdriver
(1)
Tools Needed
Location of Mounting Holes
Note 1. To avoid damaging the motherboard and its components, please do not use a
force greater than 8 lb/inch on each mounting screw during motherboard installation.
Note 2. Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
Phillips
Screws (12)
VGA
JPB1
JPG1
USB0/1(3.0)
COM1
IPMI_LAN
BMC
FAN3
FLASH
1
BMC_HB_LED1
FAN4
JSDCARD1
JTPM1
JSIOM1
SIOM:CPU1 PCI-E 3.0 X16
PCH
JCPLD1
HDD_LED1
BIOS LICENSE
X11DPT-B
+
JF2
DESIGNED IN USA
IPMI CODE
BT1
JSD1 REV:1.02
JSD1: SATA DOM POWER
CPU1
CPU2
JF1
22
Standoffs (12)
Only if Needed