Supermicro X11DPT-B User Manual page 40

Super X11DPT-B User's Manual
DIMM Installation
Please follow the instructions given in the
previous section to install the DIMM modules.
For the system to work properly, please use
memory modules of the same type and speed
on the motherboard.
Push the release tabs outwards on both ends
of the DIMM slot to unlock it.
1.
Align the key of the DIMM module with the
receptive point on the memory slot.
2.
Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
3.
Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
4.
Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Module Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warnings:
1. Please do not use excessive force when pressing the release tabs on the ends of the DIMM
socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
VGA
JPB1
JPG1
USB0/1(3.0)
COM1
IPMI_LAN
BMC
FAN3
1 FLASH
BMC_HB_LED1
FAN4
JSDCARD1
JTPM1
SIOM:CPU1 PCI-E 3.0 X16
PCH JCPLD1
HDD_LED1
BIOS LICENSE
+
JF2
IPMI CODE
BT1
JSD1
JSD1: SATA DOM POWER
CPU1
CPU2
JF1
Press both notches
straight down into
the memory slot.
40
JSIOM1
X11DPT-B
DESIGNED IN USA
REV:1.02
Notches
Release Tabs