Table of Contents
Advertisement
Super X11DPT-B User's Manual
VGA Port
A VGA port is located on the I/O back panel. Use this port to connect to a compatible VGA
display.
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) switch and an LED2 indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the DP port on the back panel. The UID LED is
located next to the UID switch. When you press the UID switch, the UID LED will be turned
on. Press the UID switch again to turn off the LED indicator. The UID Indicator provides easy
identification of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
2
3
VGA
JPB1
JPG1
USB0/1(3.0)
COM1
IPMI_LAN
BMC
FAN3
FLASH
1
BMC_HB_LED1
FAN4
JSDCARD1
JTPM1
PCH
JCPLD1
HDD_LED1
+
JF2
IPMI CODE
BT1
JSD1
JSD1: SATA DOM POWER
CPU1
CPU2
JF1
1
JSIOM1
SIOM:CPU1 PCI-E 3.0 X16
BIOS LICENSE
X11DPT-B
DESIGNED IN USA
REV:1.02
UID LED
Pin Definitions
Color
Status
Blue: On
Unit Identified
42
UID Switch
Pin Definitions
Pin#
Definition
1
Ground
2
Ground
3
Button In
4
Button In
1. VGA Port
2. UID Switch
3. UID LED
Advertisement
Table of Contents
