Table of Contents
Advertisement
Secure Boot
When you select this submenu and press the <Enter> key, the following items will display:
•
System Mode
•
Vendor Key
•
Secure Boot
Secure Boot
Select Enabled to use Secure Boot settings. The options are Enabled and Disabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CMS Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Enabled and Disabled.
Key Management
Vendor Keys
Provision Factory Defaults
Select Yes to install manufacturer default keys for system security use. The options are
Enabled and Disabled.
Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No.
Reset to Setup Mode
This feature resets the system to Setup Mode.
Export Secure Boot Variables
This feature is used to copy the NVRAM content of Secure Boot variables to a storage device.
Enroll EFI Image
Select this feature and press <Enter> to specify an EFI (Extensible Firmware Interface) image
for the system to use when it operates in the Secure Boot mode.
123
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
