Supermicro X11DPT-B User Manual page 13

Motherboard Features
CPU
•
Dual Intel® Xeon Scalable-SP or 2nd Generation Intel® Xeon Scalable-SP processors (Socket P) with support of two UPI
(UltraPath Interconnect) links of up to 10.4GT/s
Note: Both CPUs need to be installed for full access to the PCIe slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 16 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 6TB 3DS LRDIMM/LRDIMM/3DS RIDMM/RDIMM/NV-DIMM DDR4 (288-pin)
ECC 2933/2666/2400 MHz memory in 24 DIMM slots.
Note 1. Up to 9TB of memory is supported with DCPMM modules installed.
Note 2. Support for 2933 MHz memory is depend on the CPU SKU.
Note 3. DCPMM memory is supported by 2nd Gen Intel Xeon Scalable-SP processors only.
DIMM Size
•
Up to 256 GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621 Chipset
Expansion Slots
•
Two (2) PCIe 3.0 x16 slots (supported by CPU1 & CPU2) (SLOT1 & SLOT2)
•
One (1) PCIe 3.0 (x4 + x4) slot (supported by CPU1) and SATA connections (I-SATA0-5 & S-SATA0-5) (SXB1)
•
One (1) PCIe 3.0 x24 slot (supported by CPU2) (SXB2)
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Management Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI LAN located on the rear IO backpanel
Graphics
•
Graphics controller via AST 2500 BMC (Baseboard Management Controller)
I/O Devices
•
SATA 3.0
•
RAID (PCH)
Peripheral Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 0/1)
Motherboard Features
I-SATA & S-SATA 3.0 ports
•
I-SATA0-5/S-SATA0-5
•
I-SATA6 (SuperDOM support)
•
RAID 0, 1, 5, 10
13
Chapter 1: Introduction