Changing The Bulb - CDA SK511 Installation, Use And Maintenance Manual

Changing the bulb

Unscrew the protective cover. We
recommend that you wash and dry the
glass cover at this point.
Carefully remove the old bulb and
insert the new bulb suitable for high
temperatures (300ºC) having the
following specifications: 230-240V,
50Hz, 25W, G9 fitting.
Refit the protective cover.
IMPORTANT
• Never use screwdrivers or other
utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder.
Remove only by hand.
• Never replace the bulb with bare hands as contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves.
Please note:
The bulb replacement is not covered by your guarantee.
Fig. 10
27