Table of Contents
Advertisement
Changing the oven light bulb(s)
Important:
•
Before any maintenance is started involving electrical parts,
the appliance must be disconnected from the power supply.
•
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
•
Please be careful when using utensils (e.g. flat-headed
screwdriver) to remove the light cover. When not used carefully
they could damage the enamel of the oven or the lamp holder.
•
Never replace the bulb with bare hands as contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves. Old bulbs may also be hot!
Changing the bulb (fig. 15)
•
Move any accessories that are blocking access to the bulb covers.
•
Carefully, and with a small, clean,
flat-headed screwdriver, pry the
glass bulb cover(s) away from
the side wall(s). Replace the bulb
with the new one suitable for high
temperatures (300ºC) having the
following specifications: 230-240V,
50Hz, 25W G9 fitting.
•
Refit the protective cover. Ensure
that the concave lip on the inside
of the glass cover is at the top
when refitting it (Fig. 15).
Please note: The bulb replacement is not covered by your guarantee.
Fig. 15
31
Advertisement
Table of Contents
