CDA SK511 Installation, Use And Maintenance Manual page 7

programmes. This can be achieved either from an open
window or the use of a fan.
• Before any pyrolytic programme, remove all shelves, trays
and other accessories from the oven and clean up any
major spills to avoid the risk of fire or excessive smoke.
• Do not hang towels or cloths on the oven handle during
pyrolysis.
• Ensure the oven is cool and power to the appliance has
been turned off before removing the door. Failure to do
so could result in electrical shock or burns.
Error codes
Included in the table below are a series of error codes
that may appear on the display screen of the appliance
and the reasons for why they have appeared. In the
event of a code showing on your display, please
contact the CDA Customer Care Department and
quote the error code displayed.
Code
E01
E04 Temperature sensor short circuit
E06 Board communication malfunction
Fault
No temperature sensor
Reason
No temperature sensor detected, oven
will stop working
There is a short circuit within the tempera-
ture sensor. Sensor has failed
A connecting wire between the power
panel and display panel is loose
7