CDA SK511 Installation, Use And Maintenance Manual page 26

• If you need to remove the inner door glasses, then lift them from the
door slightly and remove the rubber spacers holding them together.
Once these have been removed, you can slide the glass from the
clips at the bottom of the door and remove them completely.
• After cleaning the glass, replacement is a reversal of the removal
process. Use the photos below to help you replace the rubber
spacers properly.
• Take care to assemble the glass the right way around. The shiny
side of the black area on the inner glass should be facing outwards.
The shorter of the two middle panes should be closest to the door
handle (as per image below and to the right).
Please note: Any removed panes should be placed somewhere clean
and dry (such as on a clean towel) where they will neither cause nor
receive damage.
Top view of door with trim
removed
26
Side view of spacer