Changing The Oven Light Bulb - CDA SC360SS Use And Maintenance

Changing the oven light bulb

Important:
Before any maintenance is started involving electrical parts, the
appliance must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder.
Remove only by hand.
Never replace the bulb with bare hands as contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves. Old bulbs may also be hot!
Changing the bulb (Fig. 9)
• Unscrew the protective cover.
• Carefully extract and replace the bulb
with the new one suitable for high
temperatures (300ºC) having the
following specifications: 230V, 25W
E14 thread fitting
• Refit the protective cover
Please note:
The bulb replacement is not covered by
your guarantee.
22 | Instruction Manual
Fig. 9