Disposal And Recycling; Nameplate - Sunrise Medical Empulse F55 Directions For Use Manual

12.0 Disposal and recycling

NOTE: If the pulling device has been made available to
you as part of a charity or medical loans scheme, then it
may not belong to you. If it is no longer required, then
follow the instructions to return it as given by the
organisation that made the pulling device available to you.
Electrical and electronic equipment need to be disposed of
separately to general household waste at specific state-
provided locations. The correct disposal and separate
collection of used appliances serves to prevent potential
damage to health and the environment. It is a requirement
for the re-utilisation and recycling of used electrical and
electronic equipment.
Detailed information on the disposal of your used
equipment can be obtained from your local authority, your
waste disposal service, the specialist dealer from which
you purchased the product, or your sales contact.
This information only applies to equipment which is
installed and sold in the countries of the European Union
and which is subject to the European directive 2002/96/
EC. In countries outside of the European Union, deviating
conditions apply to the disposal of electrical and electronic
waste.
Materials Used:
In the following section, there is a description of the
materials used on the pulling device, in view of the
disposal or recycling of the pulling device and its
packaging. There may also be special local regulations in
force with regard to disposal or recycling, these must be
taken into account when disposing of your pulling device.
(This can include the cleaning or decontamination of the
pulling device prior to disposal).
Aluminium:
Wheels, steering tube, parts of the frame,
main brake lever, handlebar, docking clamps
Steel: Frame and intermediate sub-frame, fork
Plastic:
Handles, plugs, housing parts and tyres.
Packaging: Made of soft polyethylene, cardboard
Battery: Lithium-ion battery (hazardous product)
Please see battery section for more detailed information.
Empulse F55 Rev.D

13.0 Nameplate

The nameplate is located on the frame as well as on a
label in the owner's manual. The nameplate indicates the
exact model designation and other technical
specifications. Please provide the following pieces of
information whenever you have to order replacement
parts or to file a claim:
SAMPLE
Sunrise Medical GmbH
Kahlbachring 2-4
69254 Malsch / Germany
TYPE:
F55
Power Assist
max
110 kg max. 6 ° X km/h 36 Volt
Empulse F55
Product Name/SKU Number.
XXXXX-XXX
Maximum safe slope, depends on wheelchair/ add-
on bike setting, posture and physical capabilities of
the user.
Load Maximum.
CE Mark
Directions for use
Not Crash Tested
This symbol means Medical Device
Date of manufacture.
Serial Number
As we are committed to continually improving the
construction of our wheelchairs and add-on bikes,
product specifications may vary slightly from the
examples illustrated. All weight/dimensions and
performance data is approximate and is provided solely
for guidance.
All products from Sunrise Medical comply with the
Medical Device Regulation (2017/745).
All add-on bikes must be used in accordance with
the manufacturer's guidelines.
Sunrise Medical GmbH
Kahlbachring 2-4
69254 Malsch/Heidelberg
Deutschland
Tel.: +49 (0) 7253/980-0
Fax: +49 (0) 7253/980-222
kundenservice@sunrisemedical.de
www.SunriseMedical.de
2021-03-03
215205130203364
31