Related Manuals for Sunrise Medical Empulse StreetJet
Summary of Contents for Sunrise Medical Empulse StreetJet
- Page 1 000690857.02 POWERED PULLING DEVICE Instructions for use Empulse StreetJet Empulse StreetJet Rev.A...
- Page 2 Pull Device Components We at SUNRISE MEDICAL have been awarded the ISO-13485 certificate, which affirms the quality of our products at every stage, from R & D to production. This products meet the requirements in accordance with EC regulations. Options or accessories shown are available at extra cost.
- Page 3 1. Throttle 2. Display 3. Handlebar 4. Brake Lever 5. Frame 6. Battery 7. Lights 8. Stand 9. Front wheel 10. Hub motor 11. Docking release lever 12. One touch docking clamps Empulse StreetJet Rev.A...
-
Page 4: Table Of Contents
8.0 Maintenance and troubleshooting 8.1. Fitting and repairing the tyre: 8.2 Regular maintenance 8.3 Electrical system 9.0 Technical Specifications 10.0 Notes on storage 11.0 Cleaning and hygiene Dealer signature and stamp 12.0 Disposal and recycling 13.0 Nameplate Empulse StreetJet Rev.A... -
Page 5: Foreword
Guidance on the combination, such as mounting, can be found within this manual. For Sunrise Medical, it is very important that we have a good relationship with our customers. We like to keep Please contact your local, authorised SUNRISE... -
Page 6: Use
In the absence of approval, in accordance with the road traffic laws, the Empulse StreetJet may not be driven on public roads, bicycle-lanes and pavements. You need to inform yourself about the country specific legislation regarding usage and your legal obligation to insure the Empulse StreetJet. -
Page 7: General Safety Notes And Driving Limits
• Only ride on asphalt paths, or firm, smooth surfaces. If you order a version which has a speed of over 6 kph, please confirm this to Sunrise Medical with your signature, • Use caution when riding over curbs, steps, potholes, etc. -
Page 8: Safety Instructions - Prior To Each Ride
• Always follow the road traffic regulations when driving on public roads and footpaths. • Avoid driving on unpaved or loose surfaces (e.g. on loose gravel, in sand, mud, snow, ice or through deep puddles of water). Empulse StreetJet Rev.A... -
Page 9: Warranty
Repairs have been carried out, before our Customer Service has been informed of the circumstances. 6. This guarantee is subject to the law of the country in which the Sunrise Medical product was purchased. * Means the Sunrise Medical facility from which the product was purchased. -
Page 10: Handling
The pulling device must be handed over ready to use from Sunrise Medical or an authorised Sunrise Medical dealer. • Before using for the first time, the battery should be fully charged. -
Page 11: Fitting To The Wheelchair For The First Time
If you have ordered the clamps for frames CAUTION with round tubes, There are two different sets of round • Make sure that the Empulse StreetJet is securely frame tube clamps available which can be fine adjusted attached to the wheelchair. -
Page 12: Fitting The Pulling Device And Adjusting The Fitting Angle Correctly
Adjusting the subframe to the right front frame width and angle • Close the clamps by pushing on the lever NOTE: Make sure that the frame tube diameter is already adjusted (see section 4.1) • Loosen the Screws (A) and (B) of the clamps Empulse StreetJet Rev.A... - Page 13 The bolt and nut can then be tightened to 12Nm to secure the stand in place. • Tighten the screws (A) to 24Nm and (B) to 16Nm Empulse StreetJet Rev.A...
- Page 14 CAUTION! Always observe the correct torque. DANGER! Make sure to route and secure all cables properly. Make sure not to bend or stretch cables. If necessary, use zip- ties to fasten cables. Empulse StreetJet Rev.A...
-
Page 15: Docking And De-Docking Of The Pulling Device By The User
Place the pulling device carefully onto the floor so that it • The gap between the castors of the wheelchair and does not get damaged. the floor is at least 40mm. Empulse StreetJet Rev.A... -
Page 16: Operation
WARNING! • Always switch the pulling device off before docking or de-docking in order to avoid unintentional operation • When not being used, always switch the pulling device off using the switch on the battery. Empulse StreetJet Rev.A... -
Page 17: Selecting The Direction Of Travel
• Always switch the pulling device off when docking and de-docking as well as when it is not being used in order to prevent accidental activation of the throttle. Empulse StreetJet Rev.A... -
Page 18: Functions Of The Display
6. Display mode: “TRIP TIME”- Total drive time since the current battery capacity is displayed. last trip clear (see section deleting the trip meter) DANGER! • Only carry out setting work when the device is stationary and never when driving. Empulse StreetJet Rev.A... - Page 19 Select “tC-y” to zero the odometer and press the “On/Off” button for 2 seconds in order to confirm the entry and leave the menu. Press the “On/Off” button briefly to confirm and toggle to the next menu point. Empulse StreetJet Rev.A...
-
Page 20: Battery And Charger
The battery delivered with the product must only be used precautions before activating the battery and before to drive the Empulse StreetJet from Sunrise Medical. No starting the charging process. other components may be connected to it. Any other use requires the written authorisation of the manufacturer. - Page 21 0 °C and 40 °C. If you attempt to carry out a charging process outside of this temperature range, the battery mechanism automatically switches off the charging process. • Only use the designated charger to charge the battery. Your specialist dealer can provide the relevant information. Empulse StreetJet Rev.A...
-
Page 22: Notes For Transportation In Aeroplanes
Your specialist dealer can provide the relevant WARNING! information. • The battery of the Empulse StreetJet contains lithium- • When the charging process is complete, we ion cells. For shipping or transportation, you must recommend disconnecting the charger from the mains comply with the relevant legal guidelines. -
Page 23: Charge Status Display For The Battery
LED= 50%, 1 LED=20% • The display will go back off after approximately 10 seconds. NOTE: • The pulling device is delivered with two identical keys. Always store the keys separately and make a note of the key number. Empulse StreetJet Rev.A... -
Page 24: Charging The Battery
Battery warranties are subject to periods set by the manufacturers. However, most of these warranties are subject to a wear and tear clause, and if you genuinely wear out your batteries in 24 months, it will not be possible to obtain a replacement under warranty. Empulse StreetJet Rev.A... -
Page 25: Regular Maintenance
• Check all freely-accessible plug connections for dirt or moisture. Clean the contacts if necessary with a clean, dry cloth. Use contact spray if necessary, but do not use lubricating or penetrating oil to clean the contacts under any circumstances. Empulse StreetJet Rev.A... -
Page 26: Technical Specifications
Maximum number of charging cycles 1000 Protection Rating IP65 Warranty 2 years Display State of charge Functions On/off switch Weight of battery pack: 2.6kg Battery Charger Input 100-240V AC End-of-charge voltage 42 Volt Charging current 2.0 A Protection Rating IPx4 Empulse StreetJet Rev.A... - Page 27 * The range depends on terrain and the prevailing driving conditions. The specified max range of action is valid for optimum travel conditions (level terrain, a newly recharged battery pack, ambient temperature of 20 °C, smooth travel, etc.). At lower temperatures, the range of the pull device may be lower than the range specified. Empulse StreetJet Rev.A...
-
Page 28: Notes On Storage
• After a long period of storage, check that the brakes are working and check the condition of the tyres before setting off. Empulse StreetJet Rev.A... -
Page 29: Disposal And Recycling
Steel: Steering tube, frameand sub-frame Plastic: Handles, plugs, housing parts, tyres and clamp covers Packaging: Made of soft polyethylene, cardboard Battery: Lithium-ion battery (hazardous product) Carbon Fibre: Fender Please see battery section for more detailed information. Empulse StreetJet Rev.A... -
Page 30: Nameplate
Please provide the following pieces of All products from Sunrise Medical comply with the information whenever you have to order replacement Medical Device Regulation (2017/745). parts or to file a claim:... - Page 31 Empulse StreetJet Rev.A...
- Page 32 F: +31 (0)30 – 60 55 880 Sunrise Medical Aps E: info@sunrisemedical.nl Mårkærvej 5-9 www.SunriseMedical.nl 2630 Taastrup Denmark Sunrise Medical HCM B.V. +45 70 22 43 49 Vossenbeemd 104 info@sunrisemedical.dk 5705 CL Helmond Sunrisemedical.dk The Netherlands T: +31 (0)492 593 888 Sunrise Medical Australia E: customerservice@sunrisemedical.nl...