Heat Sink - HP OMEN Maintenance And Service Manual

4. Remove the fans (4).
Reverse this procedure to install the fans.

Heat sink

NOTE: The heat sink spare parts kit includes replacement thermal material.
Description
Heat sink (for use only on products equipped with NVIDIA N17P-G0) (GTX-1050)
Heat sink (for use only on products equipped with NVIDIA N17P-G1) (GTX-1050ti)
Heat sink (for use only on products equipped with NVIDIA N17E-G1) (GTX-1060)
Heat sink (for use only on products equipped with NVIDIA N17E-G2) (GTX-1070)
Heat sink (for use only on products equipped with AMD R17M-E1-90) (RX580)
IMPORTANT:
replacement.
Before removing the heat sink, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Make special note of each screw and screw lock size and location during removal and
Spare part number
931571-001
931572-001
931573-001
931574-001
931575-001
Component replacement procedures 53