Toshiba teli DDU Series Instruction Manual page 164

// 1.Set the camera parameters and save them to UserSet.
...
// GenICam node handle
CAM_NODE_HANDLE hIndex = NULL;
CAM_NODE_HANDLE hEntry = NULL;
CAM_NODE_HANDLE hTerminateAt = NULL;
CAM_NODE_HANDLE hEnable = NULL;
// Retrieve GenICam node.
Nd_GetNode(s_hCam, "SequentialShutterIndex", &hIndex);
Nd_GetNode(s_hCam, "SequentialShutterEntry", &hEntry);
Nd_GetNode(s_hCam, "SequentialShutterTerminateAt", &hTerminateAt);
Nd_GetNode(s_hCam, "SequentialShutterEnable", &hEnable);
int64_t
int64_t
for(index=0; index<3; index++)
{
// 2.Set SequentialShutterIndex and SequentialShutterEntry.
Nd_SetIntValue(s_hCam, hIndex, index+1); // 1 origin
Nd_SetIntValue(s_hCam, hEntry, entry[index]);
}
// 3.Set SequentialShutterTerminateAt.
Nd_SetIntValue(s_hCam, hTerminateAt, index); // 3 UserSet will be repeated.
// 4.Set the activation of SequentialShutter function by 'SequentialShutterEnable'.
Nd_SetEnumStrValue(s_hCam, hEnable, "On");
Please refer to [INode functions], [IInteger node functions] and [IEnumeration node functions] in
[TeliCamAPI Library manual] for more detail.
Register access API
Control SequentialShutter by accessing IIDC2 registers directly.
1. Set the camera parameters and save them to UserSet. Repeat this as you required.
2. Sets the UserSet number to register to the sequence.
Write to 'Value[0]' to 'Value[15]' of 'SequentialShutterSequenceTable'.
The index of 'Value' register means sequence index. (0 origin)
3. Set the number of Index to repeat the sequence.
Write to 'Value' field of 'SequentialShutterTerminateAt'.
4. Set the activation of SequentialShutter function.
Write to 'Value' field of 'SequentialShutterEnable' register to activate LUT function.
Copyright © 2019 Toshiba Teli Corpotration, All rights reserved.
entry[] = {1,4,2}; // Sequence = {UserSet1,UserSet4,UserSet2}
index;
API name
Cam_ReadReg
Cam_WriteReg
163 / 172
Description
Read register value
Write register value
D4289451A
http://www.toshiba-teli.co.jp/en/