Toshiba teli DDU Series Instruction Manual page 90

● Control with TeliCamSDK
Camera feature API
Control Trigger features using dedicated API.
GetCamTriggerSequence
GetCamTriggerAdditionalParameterMinMax
GetCamTriggerAdditionalParameter
SetCamTriggerAdditionalParameter
GetCamTriggerDelayMinMax
ExecuteCamSoftwareTrigger
1. Select a trigger mode.
Set 'TriggerMode' with 'SetCamTriggerMode' function.
2. Select a trigger sequence of random trigger shutter.
Set 'TriggerSequence' with 'SetCamTriggerSequence' function.
3. Select a trigger source of random trigger shutter.
Set 'TriggerSource' with 'SetCamTriggerSource' function.
4. Select a trigger activation of hardware trigger.
5. Set the number of frames to exposure in Bulk mode.
Set 'TriggerAdditionalParameter' with 'SetCamTriggerAdditionalParameter' function.
6. Set a trigger delay.
Set 'TriggerDelay' with 'SetCamTriggerDelay' function.
7. Capture image stream.
To start and stop capturing image is the same way as AcquisitionControl.
Please refer to [Camera streaming functions] in [TeliCamAPI Library manual]
and [GrabStreamSimple] sample code in your TeliCamSDK install folder.
8. Execute software trigger.
Execute Software Trigger in SoftwareTrigger mode with 'ExecuteCamSoftwareTrigger' function.
Please refer to [Controlling camera feature functions] in [TeliCamAPI Library manual] for more detail.
Copyright © 2019 Toshiba Teli Corpotration, All rights reserved.
API name
GetCamTriggerMode
SetCamTriggerMode
SetCamTriggerSequence
GetCamTriggerSource
SetCamTriggerSource
GetCamTriggerDelay
SetCamTriggerDelay
Description
Get current TriggerMode
Set new TriggerMode
Get current TriggerSequence
Set new TriggerSequence
Get current TriggerSource
Set new TriggerSource
Get minimum and maximum value
Get current TriggerAdditionalParameter value
Set new TriggerAdditionalParameter value
Get minimum and maximum value
Get current TriggerDelay value
Set new TriggerDelay value
Execute Software Trigger
89 / 172 D4289451A
http://www.toshiba-teli.co.jp/en/