Toshiba teli DDU Series Instruction Manual page 95

 Minimum/Maximum Value
● Note
In SoftwareTrigger operation, the delay time from 'TriggerSoftware' to exposure is not guaranteed.
DDU series have different hardware trigger source.
Please refer to 'I/O Specification' section as well.
TriggerSource
TriggerDelay is applied to both of HardwareTrigger and SoftwareTrigger.
TriggerAdditionalParameter is only effective in Bulk mode.
Copyright © 2019 Toshiba Teli Corpotration, All rights reserved.
TriggerAdditional
Parameter
Minimum
Maximum
Initial Value
TriggerDelay
Minimum
Maximum
Initial Value
Formula
Line0 (*)
Line2 e-CON connector : 1 pin, 5V CMOS, High level 4.0 to 5.0V
Line3 Round connector : 2 pin, Isoration input, High level 3.3 to 24.0V
Line4 Round connector : 2 pin, Isoration input, High level 3.3 to 24.0V
Raw Value =
Absolute (Float) Value
Raw Value Absolute (Float) Value
0
250000000
0
Absolute Value [us] = Raw Value / 125
Description
e-CON connector : 4 pin, High level 2.0 to 24.0V
94 / 172
0
255
0
0.0 [us]
2000000.0 [us]
0.0 [us]
* initial factory setting
http://www.toshiba-teli.co.jp/en/
D4289451A