Toshiba teli DDU Series Instruction Manual page 171

● Note
In Bulk function, you may want to set "Continuous" to "AcquisitionMode" register.
You can set "MultiFrame", but acquisition frame number is limited by "AcquisitionFrameCount.
AcquisitionMode = MultiFrame
AcquisitionFrameCount = 2
TriggerMode = On
TriggerSequence = 6
TriggerAdditionalParameter = 3
Start
Acquisition
Command
The trigger can be input in arbitrary timing.
Trigger
VD
Exposure
Frame 1
*Exposure overlaps sensor readout.
*Exposure time is determined by ExposureTime setting.
USB Streaming
Copyright © 2019 Toshiba Teli Corpotration, All rights reserved.
AcquisitionFrameRate
Frame 2
TriggerAdditionalParameter
Frame 1 Frame 2
AcquisitionFrameCount
Frame 3
This exposure is
discarded.
Stream
stops
170 / 172
Stop Start
Counter is reset.
Frame 1
http://www.toshiba-teli.co.jp/en/
Frame 1
D4289451A