Saluki S1131 User Manual page 28

Menu description: select sweep type, step sweep and list sweep are supported
[Ref Repe]

Menu description: switch between single sweep and continuous sweep.
[Single Sweep]

Menu description: when [Single] is selected in [Sweep Repe], [Single Sweep] acts as a trigger. S1131 sweeps each time when [Single
Sweep] is clicked.
[CFG Step]

Menu description: step sweep settings, include start/stop frequency, start/stop amplitude, sweep point and dwell time of each point.
[CFG List]

Menu description: List sweep settings, user can edit the sweep list, add/delete sweep point. Frequency, amplitude and dwell time of each
point can be edited.
[SWP Trig]

Menu description: Switch between free run and external trigger.
[SWP Dire]

Menu description: to set the sweep direction, [down] means from start to stop, [UP] means from stop to start.
. [SWP Retr]

Menu description: Enable/disable sweep return function. Sweep return function allows sweep from the first point to the last, and returns
from the last point to the first.
Tel: 886.2.2175 2930 Email: sales@salukitec.com
23
www.salukitec.com