Freq - Saluki S1131 User Manual

6.2 FREQ

The 【FREQ】 key on the front panel is used to set parameters related to the signal generator frequency, including [Ref Set], [Ref State],
[Offset], [Multiplier], [10MHzRef]. Following diagram gives a direct view of the menu structure
[Ref Set]

Menu description: To set the reference frequency
[Ref State]

Menu description: To enable/disable reference frequency
[Offset]

Menu description: to set the frequency offset, for example, set the [Offset] to 500MHz and set the output frequency to 3GHz, the output
frequency will be 2.5GHz.
[Multiplier]

Menu description: to set the frequency multiplier, for example, set the [Multiplier] to 2 and set the output frequency to 3GHz, the final
output signal frequency will be 1.5GHz
[10MHzRef]

Menu description: to switch between internal 10MHz Reference source and external 10MHz source.
Tel: 886.2.2175 2930 Email: sales@salukitec.com
20
www.salukitec.com